No abstract

No abstract

In this project different aqueous based solvent systems were investigated for the dissolution of steam exploded (STEX) dissolving pulps prior to a coagulation step for preparation of textile fibers. The pulp samples studied could, to a large degree, be dissolved in a NaOH/urea/thiourea system, but there are always residuals, irrespective of the conditions. The dissolution process appeared to be kinetically controlled, as prolonged retention time decreased the amount of residuals. A pre-cooled NaOH/urea/thiourea system, and a retention time of 60 h generated the lowest amount (6%) of residuals of the STEX pretreated dissolving pulp studied. Some fundamental results are described and a model for dissolution of dissolving pulp fibers is proposed.

The dissolution of pulps with varying characteristic properties, for example cellulose chain length or content of hemicellulose, has been investigated in two alkaline solvent systems [sodium hydroxide (NaOH)/urea/thiourea (8:8:6.5 by wt.) and NaOH/zince oxide (ZnO) (9:0.5 by wt.)]. One standard paper pulp, two dissolving pulps and three pretreated pulps were selected for this study. The dissolution parameters in focus were the fi ber dimensions, average degree of poly merization (DP), polydispersity, water retention value and content of hemicelluloses. The solubility was not infl uenced by the fi ber dimensions. The only signifi cant properties, according to variable importance plot, were DP and composition of the hemicelluloses. It was also established that mass transfer effects during the dissolution stage plays an important role in the dissolution of cellulose derived from pulp fi bers.