A significant improvement in acquisition speed of structured illumination microscopy (SIM) opens a new field of applications to this already well-established super-resolution method towards 3D scanning real-time imaging of living cells. We demonstrate a method of increased acquisition speed on a two-beam SIM fluorescence microscope with a lateral resolution of ~100 nm at a maximum raw data acquisition rate of 162 frames per second (fps) with a region of interest of 16.5  ×  16.5 µm, free of mechanically moving components. We use a programmable spatial light modulator (ferroelectric LCOS) which promises precise and rapid control of the excitation pattern in the sample plane. A passive Fourier filter and a segmented azimuthally patterned polarizer are used to perform structured illumination with maximum contrast. Furthermore, the free running mode in a modern sCMOS camera helps to achieve faster data acquisition.

Structured illumination microscopy in thick fluorescent samples is a challenging task. The out-of-focus fluorescence background deteriorates the illumination pattern and the reconstructed images suffer from influence of noise. We present a combination of structured illumination microscopy with line scanning. This technique reduces the out-of-focus fluorescence background, which improves the modulation and the quality of the illumination pattern and therefore facilitates the reconstruction. We present super-resolution, optically sectioned images of a thick fluorescent sample, revealing details of the specimen's inner structure.

Abstract:We describe a two-beam interference structured illumination fluorescence microscope. The novelty of the presented system lies in its simplicity. A programmable electro-optical spatial light modulator in an intermediate image plane enables precise and rapid control of the excitation pattern in the specimen. The contrast of the projected light pattern is strongly influenced by the polarization state of the light entering the high NA objective. To achieve high contrast, we use a segmented polarizer. Furthermore, a mask with six holes blocks unwanted components in the spatial frequency spectrum of the illumination grating. Both these passive components serve their purpose in a simpler and almost as efficient way as active components. We demonstrate a lateral resolution of 114.2 ± 9.5 nm at a frame rate of 7.6 fps per reconstructed 2D slice.

No abstract

Spatial light modulators (SLM) update in a synchronous manner, whereas the data readout process in fast structured illumination systems is usually done using a rolling shutter camera with asynchronous readout. In structured illumination microscopy (SIM), this leads to synchronization problems causing a speed limit for fast acquisition. In this paper we present a configuration to overcome this limit by exploiting the extremely fast SLM display and dividing it into several segments along the direction of the rolling shutter of the sCMOS camera and displaying multiple SLM frames per camera acquisition. The sCMOS runs in continuous rolling shutter mode and the SLM keeps the readout-line always inside a dark region presenting different SIM patterns before and after the readout/start-exposure line. Using this approach, we reached a raw frame rate of 714 frames per second (fps) resulting in a two-beam SIM acquisition rate of 79 fps with a region of interest (ROI) of 16.5  ×  16.5 μm2.