Increasing the efficiency of steam power plants is important to reduce their CO2 emissions and can be achieved by increasing steam temperatures beyond 700 °C. Within the present study, the thermal behavior of a steam by-pass valve subject to cyclic operation with 700 °C steam is investigated experimentally and numerically. An innovative numerical approach was applied to predict the valve’s thermal behavior during cyclic operation, which is essential for fatigue life assessment of such a component. Validation of the applied numerical approach has shown good agreement with measurement results, indicating the potential of its application for the valve design process.
Increasing the efficiency of steam cycle power plants is extremely important for the reduction of their CO2 emissions. Today’s best steam cycle power plants have a net plant efficiency of 46 %. Since the worldwide average efficiency is still in the range of 30 %, there exists a great potential in reduction of CO2 emissions by replacing old power stations with new ones. A further great potential lies in achieving even higher efficiencies by increasing live steam temperatures to more than 700 °C, so that the efficiency of steam power plants is pushed over the 50 % mark. Within a research project funded by the German government the challenges associated with material’s behaviour under elevated temperatures are investigated. In this project, a bypass-valve was installed in an experimental set-up in a real power station and is supplied with over 700 °C steam and investigated under long-term cyclic operation. Thermocouple measurements on reference points on the valve body and thermo graphic camera measurements deliver information about the real transient thermal behaviour of the valve. Numerical investigations aim to accurately model the transient thermal behaviour of the valve during cyclic operation and calculate corresponding three-dimensional temperature distributions, which are essential for conducting reliable mechanical integrity analysis for the applied Nickel-base material. Applying standard FEM thermal analyses that are based on heat transfer boundary conditions is often related with uncertainties regarding the convective heat transfer and corresponding coefficients. The application of a hybrid stepwise frozen conjugate heat transfer calculation approach aims to make use of the advantage of the conjugate heat transfer approach with respect to high accuracy in heat transfer calculation and reduce the calculation effort by freezing the fluid domain at different steps along the loading cycle and coupling it to the transient thermal load calculation in the solid domain. Both the standard FEM thermal analysis method and the hybrid stepwise frozen conjugate heat transfer calculation approach have been applied to calculate the transient thermal load in the valve. A validation of the numerical results has been performed for the reference points on the valve body and shows that the hybrid approach has better accuracy than the standard approach and shows very good agreement with the experimental results.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.