3D geodata play an increasingly important role in precision agriculture, e.g., for modeling in-field variations of grain crop features such as height or biomass. A common data capturing method is LiDAR, which often requires expensive equipment and produces large datasets. This study contributes to the improvement of 3D geodata capturing efficiency by assessing the effect of reduced scanning resolution on crop surface models (CSMs). The analysis is based on high-end LiDAR point clouds of grain crop fields of different varieties (rye and wheat) and nitrogen fertilization stages (100%, 50%, 10%). Lower scanning resolutions are simulated by keeping every n-th laser beam with increasing step widths n. For each iteration step, high-resolution CSMs (0.01 m2 cells) are derived and assessed regarding their coverage relative to a seamless CSM derived from the original point cloud, standard deviation of elevation and mean elevation. Reducing the resolution to, e.g., 25% still leads to a coverage of >90% and a mean CSM elevation of >96% of measured crop height. CSM types (maximum elevation or 90th-percentile elevation) react differently to reduced scanning resolutions in different crops (variety, density). The results can help to assess the trade-off between CSM quality and minimum requirements regarding equipment and capturing set-up.
BackgroundIn agriculture, information about the spatial distribution of crop height is valuable for applications such as biomass and yield estimation, or increasing field work efficiency in terms of fertilizing, applying pesticides, irrigation, etc. Established methods for capturing crop height often comprise restrictions in terms of cost and time efficiency, flexibility, and temporal and spatial resolution of measurements. Furthermore, crop height is mostly derived from a measurement of the bare terrain prior to plant growth and measurements of the crop surface when plants are growing, resulting in the need of multiple field campaigns. In our study, we examine a method to derive crop heights directly from data of a plot of full grown maize plants captured in a single field campaign. We assess continuous raster crop height models (CHMs) and individual plant heights derived from data collected with the low-cost 3D camera Microsoft® Kinect® for Xbox One™ based on a comprehensive comparison to terrestrial laser scanning (TLS) reference data.ResultsWe examine single measurements captured with the 3D camera and a combination of the single measurements, i.e. a combination of multiple perspectives. The quality of both CHMs, and individual plant heights is improved by combining the measurements. R2 of CHMs derived from single measurements range from 0.48 to 0.88, combining all measurements leads to an R2 of 0.89. In case of individual plant heights, an R2 of 0.98 is achieved for the combined measures (with R2 = 0.44 for the single measurements). The crop heights derived from the 3D camera measurements comprise an average underestimation of 0.06 m compared to TLS reference values.ConclusionWe recommend the combination of multiple low-cost 3D camera measurements, removal of measurement artefacts, and the inclusion of correction functions to improve the quality of crop height measurements. Operating low-cost 3D cameras under field conditions on agricultural machines or on autonomous platforms can offer time and cost efficient tools for capturing the spatial distribution of crop heights directly in the field and subsequently to advance agricultural efficiency and productivity. More general, all processes which include the 3D geometry of natural objects can profit from low-cost methods producing 3D geodata.Electronic supplementary materialThe online version of this article (doi:10.1186/s13007-016-0150-6) contains supplementary material, which is available to authorized users.
Change analysis of rock glaciers is crucial to analyzing the adaptation of surface and subsurface processes to changing environmental conditions at different timescales because rock glaciers are considered as potentially unstable slopes and solid water reservoirs. To quantify surface change in complex surface topographies with varying surface orientation and roughness, a full three‐dimensional (3D) change analysis is required. This study therefore proposes a novel approach for accurate 3D point cloud‐based quantification and analysis of geomorphological activity on rock glaciers. It is applied to the lower tongue area of the Äußeres Hochebenkar rock glacier, Ötztal Alps, Austria. Multi‐temporal and multi‐source topographic LiDAR data are used to quantify surface changes and to reveal their spatial and temporal characteristics at different timescales within the period 2006–2018. LiDAR‐based examinations are complemented with subsurface characteristics obtained from electrical resistivity tomography. This combined approach reveals active and variable spatial and temporal surface dynamics in the investigated area, with minimum detectable change between 0.09 and 0.65 m at 95% confidence. Given that this approach overcomes current uncertainties in established methods of differentiating complex rock glacier surfaces, we consider it a valuable addition that can be applied to objects of similar properties such as landslides or glaciers.
The 2nd international summer school “Close-range sensing techniques in Alpine terrain” was held in July 2017 in Obergurgl, Austria. Participants were trained in selected close-range sensing methods, such as photogrammetry, laser scanning and thermography. The program included keynotes, lectures and hands-on assignments combining field project planning, data acquisition, processing, quality assessment and interpretation. Close-range sensing was applied for different research questions of environmental monitoring in high mountain environments, such as geomorphologic process quantification, natural hazard management and vegetation mapping. The participants completed an online questionnaire evaluating the summer school, its content and organisation, which helps to improve future summer schools.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.