A rapid synthesis method for the preparation of PtRu colloids and their subsequent deposition on high surface area carbons is presented. The reaction mechanism is shown to involve the oxidation of the solvent, ethylene glycol, to mainly glycolic acid or, depending on the pH, its anion, glycolate, while the Pt(+IV) and Ru(+III) precursor salts are reduced. Glycolate acts as a stabilizer for the PtRu colloids and the glycolate concentration, and hence the size of the resulting noble metal colloids is controlled via the pH of the synthesis solution. Carbon-supported PtRu catalysts of controlled size can be prepared within the range of 0.7-4 nm. Slow scan X-ray diffraction and high-resolution transmission electron microscopy show the PtRu catalysts to be crystalline. The Ru is partly dissolved in the face-centered cubic Pt lattice, but the catalysts also consist of a separate, hexagonal Ru phase. The PtRu catalysts appear to be of the same composition independent of the catalyst size in the range of 1.2-4 nm. Particular PtRu catalysts prepared in this work display enhanced activities for the CH 3OH electro-oxidation reaction when compared to two commercial catalysts.

We detect short-range surface plasmon-polariton (SR-SPP) resonances setup in individual silver nanoantenna structures at high-spatial resolution with a scanning, subnanometer electron probe. Both even and odd multipolar resonant modes are resolved up to sixth order, and we measure their spatial distribution in relation to nanoantenna structures at energies down to 0.55 eV. Fabry-Perot type SR-SPP reflection phase shifts are calculated from direct measurements of antinode spacings in high-resolution plasmonic field maps. We observe resonant SR-SPP antinode bunching at nanoantenna terminals in high-order resonant modes, and antinode shifts in nonhomogeneous local environments. Finally, we achieve good agreement of our experimental SR-SPP maps with numerical calculations of photon excited near fields, using a novel integrated photon excitation geometry.

Shape- and size-controlled supported metal and intermetallic nanocrystallites are of increasing interest because of their catalytic and electrocatalytic properties. In particular, intermetallics PtX (X = Bi, Pb, Pd, Ru) are very attractive because of their high activity as fuel-cell anode catalysts for formic acid or methanol oxidation. These are normally synthesized using high-temperature techniques, but rigorous size control is very challenging. Even low-temperature techniques typically produce nanoparticles with dimensions much greater than the optimum <6 nm required for fuel cell catalysis. Here, we present a simple and robust, chemically controlled process for synthesizing size-controlled noble metal or bimetallic nanocrystallites embedded within the porous structure of ordered mesoporous carbon (OMC). By using surface-modified ordered mesoporous carbon to trap the metal precursors, nanocrystallites are formed with monodisperse sizes as low as 1.5 nm, which can be tuned up to ∼3.5 nm. To the best of our knowledge, 3-nm ordered mesoporous carbon-supported PtBi nanoparticles exhibit the highest mass activity for formic acid oxidation reported to date, and over double that of Pt-Au.

Full-color, catalyst-free InGaN/GaN dot-in-a-wire light-emitting diodes (LEDs) were monolithically grown on Si(111) by molecular beam epitaxy, with the emission characteristics controlled by the dot properties in a single epitaxial growth step. With the use of p-type modulation doping in the dot-in-a-wire heterostructures, we have demonstrated the most efficient phosphor-free white LEDs ever reported, which exhibit an internal quantum efficiency of ∼56.8%, nearly unaltered CIE chromaticity coordinates with increasing injection current, and virtually zero efficiency droop at current densities up to ∼640 A/cm(2). The remarkable performance is attributed to the superior three-dimensional carrier confinement provided by the electronically coupled dot-in-a-wire heterostructures, the nearly defect- and strain-free GaN nanowires, and the significantly enhanced hole transport due to the p-type modulation doping.