Electroless plating is a powerful tool in nanofabrication and is available for many of the noble transition metals. There is, however, a striking lack of electroless plating procedures for the rarer platinum‐group metals. In this work, two plating baths for nanoscale iridium coatings are developed and their conformality and nanofabrication potential are showcased by coating ion‐track‐etched polycarbonate membranes, creating Ir nanotubes in the process. Both plating solutions yield morphologically different deposits, indicating that the microstructure of the film can be tuned by adjusting the composition of the plating bath. The catalytic performance of the deposited materials is investigated by using membrane‐embedded nanotubes as catalysts for the reduction of 4‐nitrophenol and methyl orange by borohydride, showing remarkable activity and stability. Operation in flow‐through configuration, in which the metallized membrane is implemented as a microreactor greatly enhances the interaction with the catalyst surface, considerably increasing product yield. The results highlight the potential of Ir nanoplating for realizing sophisticated nanostructures and heterogeneous catalysts, but also illustrate the intricacies related to the complex chemistry of electroless Ir plating baths.

We outline the development of a remarkably stable electroless bismuth plating bath. Its nanofabrication potential is showcased by coating ion-track etched polymer membranes, enabling the synthesis of sub-micron diameter bismuth tubes.

The effect of organic solvents on the ion track-etching of polyimide (PI) membranes is studied to enhance the nanopore fabrication process and the control over pore diameter growth. To this end, two approaches are employed to investigate the influence of organic solvents on the nanopore fabrication in PI membranes. In the first approach, the heavy ion irradiated PI samples are pretreated with organic solvents and then chemically etched with sodium hypochlorite (NaOCl) solution, resulting up to ∼4.4 times larger pore size compared to untreated ones. The second approach is based on a single-step track-etching process where the etchant (NaOCl) solution contains varying amounts of organic solvent (by vol%). The experimental data shows that a significant increase in both the bulk-etch and track-etch rates is observed by using the etchant mixture, which leads to ∼47% decrease in the nanopore fabrication time. This enhancement of nanopore fabrication process in PI membranes would open up new opportunities for their implementation in various potential applications.

No abstract