Abstract-This paper analyzes distributed control protocols for first-and second-order networked dynamical systems. We propose a class of nonlinear consensus controllers where the input of each agent can be written as a product of a nonlinear gain, and a sum of nonlinear interaction functions. By using integral Lyapunov functions, we prove the stability of the proposed control protocols, and explicitly characterize the equilibrium set. We also propose a distributed proportional-integral (PI) controller for networked dynamical systems. The PI controllers successfully attenuate constant disturbances in the network. We prove that agents with single-integrator dynamics are stable for any integral gain, and give an explicit tight upper bound on the integral gain for when the system is stable for agents with double-integrator dynamics. Throughout the paper we highlight some possible applications of the proposed controllers by realistic simulations of autonomous satellites, power systems and building temperature control.

This paper considers a distributed PI-controller for networked dynamical systems. Sufficient conditions for when the controller is able to stabilize a general linear system and eliminate static control errors are presented. The proposed controller is applied to frequency control of power transmission systems. Sufficient stability criteria are derived, and it is shown that the controller parameters can always be chosen so that the frequencies in the closed loop converge to nominal operational frequency. We show that the load sharing property of the generators is maintained, i.e., the input power of the generators is proportional to a controller parameter. The controller is evaluated by simulation on the IEEE 30 bus test network, where its effectiveness is demonstrated.

Abstract-This paper considers a distributed control algorithm for frequency control of electrical power systems. We propose a distributed controller which retains the reference frequency of the buses under unknown load changes, while asymptotically minimizing a quadratic cost of power generation. For comparison, we also propose a centralized controller which also retains the reference frequency while minimizing the same cost of power generation. We derive sufficient stability criteria for the parameters of both controllers. The controllers are evaluated by simulation on the IEEE 30 bus test network, where their performance is compared.

Abstract-This paper investigates transient performance of inverter-based microgrids in terms of the resistive power losses incurred in regulating frequency under persistent stochastic disturbances. We model the inverters as second-order oscillators and compare two algorithms for frequency regulation: the standard frequency droop controller and a distributed proportional-integral (PI) controller. The transient power losses can be quantified using an input-output H2 norm. We show that the distributed PI-controller, which has previously been proposed for secondary frequency control (the elimination of static errors), also has the potential to significantly improve performance by reducing transient power losses. This loss reduction is shown to be larger in a loosely interconnected network than in a highly interconnected one, whereas losses do not depend on connectivity if standard droop control is employed. Moreover, our results indicate that there is an optimal tuning of the distributed PI-controller for loss reduction. Overall, our results provide an additional argument in favor of distributed algorithms for secondary frequency control in microgrids.

Abstract-This paper analyzes distributed proportionalintegral controllers. We prove that integral action can be successfully applied to consensus algorithms, where attenuation of static disturbances is achieved. These control algorithms are applied to decentralized frequency control of electrical power systems. We show that the proposed algorithm can attenuate step disturbances of power loads. We provide simulations of the proposed control algorithm on the IEEE 30 bus test system that demonstrate its efficiency.