No abstract

No abstract

No abstract

No abstract

No abstract

The effect of sodium hydroxide on the-liquid phase hydrodechlorination (LPHDC) of polychlorinated dibenzo- p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) over 2% Pd/gamma-Al 2O 3 was evaluated. Reactions were carried out using 2-propanol both as a hydrogen donor and as a solvent. Fresh and used catalyst samples were characterized by BET, hydrogen chemisorption, TEM/EDS, XPS, and TPR. When the reaction mixture contained no NaOH, active-phase leaching and Pd-C formation were observed even after 10 min of reaction. Therefore, sodium hydroxide appears to be required to maintain surface metal clusters on the support and avoid binding of carbon species to the active metal. On the other hand, excess NaOH in the reaction mixture led to deposition of organic and inorganic solid residues on the catalyst surface, blocking the active sites. Under the conditions of this study, the addition of 30 mg of NaOH maintained the basicity of the system and diminished deposition of solid residues on the catalyst samples, and almost 100% detoxification was reached after a 3 h reaction.

No abstract

In the present study, polyurethane materials were obtained from castor oil, polycaprolactone and isophorone diisocyanate by incorporating different concentrations of chitosan (0.5, 1.0 and 2.0% w/w) as an additive to improve the mechanical properties and the biological activity of polyurethanes. The polyurethanes were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, stress/strain fracture tests and swelling analysis, and the hydrophilic character of the surface was determined by contact angle trials. The objectives of the study were to evaluate the effect of the incorporation of chitosan on the changes of the physico-chemical and mechanical properties and the in vitro biological activity of the polyurethanes. It was found that the incorporation of chitosan enhances the ultimate tensile strength of the polyurethanes and does not affect the strain at fracture in polyurethanes with 5% w/w of polycaprolactone and concentrations of chitosan ranging from 0 to 2% w/w. In addition, PCL5-Q-PU formulations and their degradation products did not affect cell viability of L929 mouse fibroblast and 3T3, respectively. Polyurethane formulations showed antibacterial activities against Staphylococcus aureus and Escherichia coli bacteria. The results of this study have highlighted the potential biomedical application of this polyurethanes related to soft and cardiovascular tissues.