One-dimensional nanomechanical resonators based on nanowires and nanotubes have emerged as promising candidates for mass sensors. When the resonator is clamped at one end and the atoms or molecules being measured land on the other end (which is free to vibrate), the resonance frequency of the device decreases by an amount that is proportional to the mass of the atoms or molecules. However, atoms and molecules can land at any position along the resonator, and many biomolecules have sizes that are comparable to the size of the resonator, so the relationship between the added mass and the frequency shift breaks down. Moreover, whereas resonators fabricated by top-down methods tend to vibrate in just one dimension because they are usually shaped like diving boards, perfectly axisymmetric one-dimensional nanoresonators can support flexural vibrations with the same amplitude and frequency in two dimensions. Here, we propose a new approach to mass sensing and stiffness spectroscopy based on the fact that the nanoresonator will enter a superposition state of two orthogonal vibrations with different frequencies when this symmetry is broken. Measuring these frequencies allows the mass, stiffness and azimuthal arrival direction of the adsorbate to be determined.

No abstract

The optomechanical coupling that emerges in an optical cavity in which one of the mirrors is a mechanical resonator has allowed sub-Kelvin cooling with the prospect of observing quantum phenomena and self-sustained oscillators with very high spectral purity. Both applications clearly benefit from the use of the smallest possible mechanical resonator. Unfortunately, the optomechanical coupling largely decays when the size of the mechanical system is below the light wavelength. Here, we propose to exploit the optical resonances associated to the light confinement in subwavelength structures to circumvent this limitation, efficiently extending optomechanics to nanoscale objects. We demonstrate this mechanism with suspended silicon nanowires. We are able to optically cool the mechanical vibration of the nanowires from room temperature to 30-40 K or to obtain regenerative mechanical oscillation with a frequency stability of about one part per million. The reported optomechanical phenomena can be exploited for developing cost-optimized mass sensors with sensitivities in the zeptogram range.

Highly sensitive conversion of motion into readable electrical signals is a crucial and challenging issue for nanomechanical resonators. Efficient transduction is particularly difficult to realize in devices of low dimensionality, such as beam resonators based on carbon nanotubes or silicon nanowires, where mechanical vibrations combine very high frequencies with miniscule amplitudes. Here we describe an enhanced piezoresistive transduction mechanism based on the asymmetry of the beam shape at rest. We show that this mechanism enables highly sensitive linear detection of the vibration of low-resistivity silicon beams without the need of exceptionally large piezoresistive coefficients. The general application of this effect is demonstrated by detecting multiple-order modes of silicon nanowire resonators made by either top-down or bottom-up fabrication methods. These results reveal a promising approach for practical applications of the simplest mechanical resonators, facilitating its manufacturability by very large-scale integration technologies.

Silicon nanowires (Si NWs) have been implemented in microfabricated structures to develop planar thermoelectric microgenerators (�TEGs) monolithically integrated in silicon. The purpose is to convert into electric energy the heat flow originated by thermal gradients naturally present in the environment. The compatibility of typical microfabrication technologies and the vapor-liquid-solid growth mechanism (VLS) for growing silicon nanowires has been evaluated. Low-thermal mass suspended structures have been designed, simulated and microfabricated on Silicon On Insulator substrates to passively generate thermal gradients and operate as microgenerators using silicon nanowires as thermoelectric material. Electrical measurements to evaluate the connectivity of the nanowires and thermoreflectance imaging to determine the heat transfer along the device have been employed.