The aim of this study was to determine the effect of ultrasonic vibration on the force necessary to remove pre-fabricated and anatomic and cast posts. Two hundred and forty teeth were divided into two groups. In group I, a 0.8-mm metallic pre-fabricated post, UnimetricMaillefer, was utilized; in group II, cast copper-aluminum alloy posts measuring 0.8, 1.0 and 1.2 mm in diameter were used. The root canals were prepared in three different diameters: 0.8, 1.0 and 1.2 mm, with a length of 10 mm. The posts were cemented with glass monomer cement resulting in 20 specimens for each subgroup. Half of the sample was submitted to ultrasonic vibration for 3 min, while the other half did not receive any vibration. The specimens were submitted to traction in a universal testing machine. The results were analyzed by non-parametric Mann-Whitney U, Wilcoxon and Kruskal-Wallis tests. The application of ultrasonic vibration significantly reduced the retention provided by the glass ionomer cement in the fixation of intracanal posts. The ultrasonic action was effective in both pre-fabricated and anatomic and cast posts. The effectiveness of the ultrasonic vibration was not related to the cementation line or the diameter of the post.
The continuous technological advance and increasing availability of new base metal alloys and ceramic systems in the market, coupled to the demands of daily clinical practice, have made the constant evaluation of the bond strength of metal/porcelain combinations necessary. This study evaluated the metal/porcelain shear bond strength of three ceramic systems (Duceram, Williams and Noritake) in combination with three nickel-chromium (Ni-Cr) alloys (Durabond, Verabond and Viron). Thirty cast cylinder specimens (15 mm high; 6 mm in diameter) were obtained for each alloy, in a way that 10 specimens of each alloy were tested with each porcelain. Bond strength was measured with an Emic screw-driven mechanical testing machine by applying parallel shear forces to the specimens until fracture. Shear strength was calculated using the ratio of the force applied to a demarcated area of the opaque layer. Mann-Whitney U test was used for statistical analysis of the alloy/ceramic combinations (p<0.05). Viron/Noritake had the highest shear bond sregnth means (32.93 MPa), while Verabond/Duceram (16.31 MPa) presented the lowest means. Viron/Noritake differed statistically from other combinations (p<0.05). Viron/Duceram had statistically significant higher bond strengths than Verabond/Duceram, Verabond/Williams and Durabond/Noritake (p<0.05). It was also found significant difference (p<0.05) between Verabond/Noritake, Verabond/Duceram and Durabond/Noritake. No statistically significant difference (p>0.05) were observed among the other combinations. In conclusion, the Noritake ceramic system used together with Viron alloy presented the highest resistance to shear forces, while Duceram bonded to Verabond presented the lowest bond strength. Viron/Duceram and Verabond/Noritake provided intermediate results. The combinations between the Williams ceramic system and Ni-Cr alloys had similar shear strengths among each other.
BackgroundIn the last years, several methods and devices have been proposed to record the human mandibular movements, since they provide quantitative parameters that support the diagnosis and treatment of temporomandibular disorders. The techniques currently employed suffer from a number of drawbacks including high price, unnatural to use, lack of support for real-time analysis and mandibular movements recording as a pure rotation. In this paper, we propose a specialized optical motion capture system, which causes a minimum obstruction and can support 3D mandibular movement analysis in real-time.MethodsWe used three infrared cameras together with nine reflective markers that were placed at key points of the face. Some classical techniques are suggested to conduct the camera calibration and three-dimensional reconstruction and we propose some specialized algorithms to automatically recognize our set of markers and track them along a motion capture session.ResultsTo test the system, we developed a prototype software and performed a clinical experiment in a group of 22 subjects. They were instructed to execute several movements for the functional evaluation of the mandible while the system was employed to record them. The acquired parameters and the reconstructed trajectories were used to confirm the typical function of temporomandibular joint in some subjects and to highlight its abnormal behavior in others.ConclusionsThe proposed system is an alternative to the existing optical, mechanical, electromagnetic and ultrasonic-based methods, and intends to address some drawbacks of currently available solutions. Its main goal is to assist specialists in diagnostic and treatment of temporomandibular disorders, since simple visual inspection may not be sufficient for a precise assessment of temporomandibular joint and associated muscles.
Introdução: A síndrome dolorosa miofascial (SDMf) é definida como disfunção neuromuscular caracterizada pela presença de contratura muscular e sintomotologia. Devido ao carácter multifatorial, vários tratamentos, isolados ou concomitantes, são indicados para essa disfunção. Apesar de diversos estudos disponíveis na literatura sobre essas modalidades de terapia, esses são pouco conclusivos. Objetivo: Revisar a literatura apresentando os diferentes tipos de tratamentos empregados para SDMf. Materiais e Métodos: A estratégia de busca foi realizada na base de dados do Pubmed, Scielo e Cochrane por meio dos seguintes descritores: Temporomandibular Joint Disorders, Myofascial Pain Syndromes, treatment, Randomized Controlled Trial. A avaliação dos estudos foi realizada em duas etapas por revisores independentes. Na primeira etapa, os títulos e resumos foram investigados e aqueles que apresentassem os critérios de elegibilidade eram selecionados. Na segunda etapa, os artigos foram lidos na íntegra e posteriormente incluídos conforme o consenso dos dois revisores baseando-se nos critérios de inclusão e exclusão. Resultados: 100 citações foram identificadas e 43 lidas na íntegra. 8 artigos reuniram os critérios de elegibilidade. Diversos tratamentos foram abordados como orientações ao paciente, tratamento fisioterapêutico, odontológico e terapia medicamentosa. Conclusão: As terapias como as orientações, treinamento com relaxamento muscular, exercícios da mandíbula, manipulação facial, terapia com placa oclusal, toxina botulínica, acupuntura são eficazes no controle da dor miofascial.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.