The aim of the manuscript was to present the collective results of research on the profitability of using various renewable sources in Poland with the greatest development potential. In the paper, the economic parameters of various investment projects were determined and calculated, i.e., Net Capital Value (NPV), Internal Rate of Return (IRR) and the Period of Return on Invested Capital (PBT). The economic assessment of the use of RES technologies was supplemented with the assessment of environmental benefits. The ecological criterion adopted in the study was the assessment of the potential and costs of reducing greenhouse gas emissions as a result of replacing fossil fuels with renewable energy technologies. On the basis of the constructed economic model to assess the profitability of investments, it has been shown that the analyzed projects will start to bring, depending on their type and technical specification, measurable economic benefits in the form of a reduction in the amount of energy purchased on an annual basis and environmental benefits in the form of reduction of carbon dioxide emissions to the atmosphere. Moreover, the calculations show a high potential for the use of certain renewable sources in Poland, which contributes to the fulfillment of energy and emission obligations towards the EU. The analyzes and research of the Polish energy market with the use of the presented models have shown that the project is fully economically justified and will allow investors to make a rational decision on the appropriate selection of a specific renewable energy source for their investment. The presented economic models to assess the profitability of investments in renewable energy sources can be successfully used in other countries and can also be a starting point for a discussion about the direction of energy development. Due to the lack of collective, original and up-to-date research on the domestic market, the manuscript provides the reader with the necessary knowledge regarding the legitimacy of using renewable energy sources, investment and environmental profitability.

Background: The growing consumption is what drives the development of unsustainable energy and material-intensive production technologies that emit large quantities of pollutants into the atmosphere, water, and land. Obtaining green energy allows reduction of the interference with the environment and, consequently, fits into a sustainable energy development strategy. In order to achieve the emission targets set by the EU for Poland, it is necessary to prioritize the development of renewable energy sources (RES) technologies within the energy sector.Methods: The purpose of the study was to present the results of the research relating to the return on investment of solar collectors for single-family houses in Poland. The research was presented on the basis of the legal conditions applicable to micro installations in the light of the amendment of the RES Act, and the impact of these amendments on the aspects of such investment was determined.Results: On the basis of the constructed economic model used to assess the return on investment of increasing the area of solar collectors, it has been shown that an operating installation will bring measurable economic benefits in the form of reduction in the amount of energy purchased annually in the amount of 6,756 kWh and environmental benefits in the form of reduction of carbon dioxide emissions to the atmosphere 2.4–3.6 Mg per year. An installation subsidized under the “My Electricity” program can reach an NPV of EUR 6,000 over 20 years at a discount rate r = 0 and assuming that the electricity is EUR 0.15/kWh. If the price rises to 0.2 EUR/kWh, the NPV will be 10,000 EUR. For the analyzed installation, the investment consisting in increasing the collector area in accordance with NPV is economically effective for the absorber area in the range of 5.6–7.6 m2 and reaches the maximum value for the absorber area of 6.6 m2, while the absorber area above 7 m2 contributes to reduce the value of the economic return on investment. The obtained results have been generalized, which allows to use them in the process of selecting the size of collector area for similar installations.Conclusion: The return on investment analysis carried out in respect of a detached house allowed to demonstrate that this project is fully justified. Furthermore, pursuant to the Renewable Energy Sources Act in force in Poland, treating a small entrepreneur as a prosumer who may generally take advantage of favorable conditions for discounting the produced energy leads to very favorable possibilities of settling electricity. Considering an entrepreneur as a prosumer who may use one-off depreciation of a solar collectors installation as a fixed asset and request for VAT refund is what makes such an investment very attractive in financial terms and makes it difficult to find a safe investment alternative characterized by such a high rate of return.

This paper presents an algorithm for modeling electricity and natural gas consumption in a walking furnace with the use of artificial intelligence and simulation methods, depending on the length of the rolling campaign and the established rolling program. This algorithm is the basis for the development of a proposal for a set of minimum requirements characterizing the Best Available Techniques (BAT) for beam furnaces intended for hot rolling, taking into account the requirements set out in national regulations and the recommendations described in the BREF reference documents. This information should be taken into account when drawing up an application for an integrated permit, as well as when setting emission limit values. Based on the constructed algorithm, it was shown that depending on their type and technical specification, the analyzed projects will offer measurable economic benefits in the form of reducing the amount of energy consumed by 1,076,400 kWh during the implementation of 50 rolling campaigns to reduce gas by 14,625 GJ and environmental benefits in the form of reduction of pollutant emissions into the atmosphere 80–360 g/Mg. The constructed algorithm was validated in the Dosimis-3 program, based on a discrete event-driven simulation. Thanks to this representation of the model, its user can interactively participate in changes that take place in the model and thus evaluate its behavior. The model, verified in real conditions, can be the basic source of information for making effective operational technological decisions related to the preparation of production at the rolling mill as part of planning and long-term activities.

In recent years, one of the key postulates in the European Union’s policy has become the development of renewable energy sources. In order to achieve the desired synergy effect, the idea of combining two selected sources of energy appeared. This article presents a technical and economic analysis of a hybrid connection of a ground source heat pump with a photovoltaic installation. Taking into account the heat demand of the building, a ground heat pump with a catalog nominal heating power of 25 kW was selected. This article presents the problem of the economic profitability of using a hybrid combination of a heat pump and photovoltaic panels in domestic hot water and central heating systems. The justification for the use of such heat sources in these installations is due to global trends and the gradual departure from conventional energy sources such as oil or gas boilers. This paper presents the economic and ecological results of using the pump heat connected together with photovoltaic panels. In the economic analysis, with the assumed installation costs related to the use of the considered heat pump and PV, two parameters commonly used in the investment analysis (static and dynamic) were used, namely, the simple payback period and the net present value of the investment. For the adopted assumptions, the usable area of the facility and the number of years of use were indicated, at which the investment in question is competitive with other alternative investment interest methods and will start to bring tangible benefits. The performed analysis also has measurable environmental benefits in the form of a reduction in carbon dioxide emissions at the level of 2893 kg/year into the atmosphere. The presented solution will help future investors understand the investment profitability mechanism for their households.

The aim of this work is to develop a model of heat supply to buildings with almost zero energy consumption, indicating the significant importance of heat losses and gains in heating installations. The prepared model is to indicate the need for changes in the structure and topology of heating installations, resulting from the changing heat demand of buildings. The need to create a new model is heightened by changes that relate to tightening legal regulations related to energy consumption and demand, which must meet the standards of buildings in Poland from 2021. The article presents the assumptions and results of analyses of the use of energy installations in residential buildings that use renewable energy sources to balance energy consumption in various areas of its use. To achieve this goal, calculations were made using simulations of the impact of the use of installations using renewable energy sources on the energy performance of a building with different quality of partitions and improvement of energy efficiency in accordance with the Polish standard PN-EN 12831. The test results allow to choose the most advantageous, from the point of view of economic profitability, option of replacing installations in residential buildings, and they also allow to determine the possibilities of meeting national obligations in the field of final energy reduction and increasing the share of renewable energy sources in meeting its demand in accordance with the EU obligations imposed on Poland. Thermomodernization of buildings in the temperate climate zone allows for a reduction of 38% of energy demand over the entire life cycle of a building and a reduction of CO2 emissions by 99%.

The article presents the developed technology for the comprehensive recycling of depleted, used or damaged photovoltaic (PV) cells made of crystalline silicon. The developed concepts of technology and the results of research on recycling were presented on silicon photovoltaic cells and modules. The sequence of steps and the type of procedures used are proposed. A thermal delamination method for used commercial photovoltaic modules has been developed to separate the materials. In addition, a recycling line was proposed along with the selection of machines and a holistic approach to project profitability based on a SWOT analysis. The presented semi-automatic installation enables recycling on a laboratory scale. The line was designed for the assumed capacity of 30 t/h. The total energy demand for the designed line was calculated, which showed that 16.49 kWh is needed to recycle 1 ton of photovoltaic laminates. Implementation of developed solutions on an industrial scale will allow to reduce production costs, mainly thanks to energy savings, which translates into less devastation of the natural environment and reduced material consumption. In addition, the implementation of the PV module recycling system will reduce and, consequently, eliminate a significant amount of used PV devices deposited in landfills. The content of the article gives a fresh and innovative look at the essence of photovoltaic panel recycling processes in terms of production benefits as well as financial and environmental benefits.

Thanks to the allocation methods, i.e., the division of the total GHG emissions between each of the products generated in the production of biofuels, it is possible to reduce the emissions of these gases by up to 35% in relation to the production and combustion of fuels derived from crude oil. As part of this study, the biodiesel production process was analyzed in terms of greenhouse gas (GHG) emissions. On the basis of the obtained results, the key factors influencing the emissions level of the biodiesel production process were identified. In order to assess the sensitivity of the results of the adopted allocation method, this study included calculations of GHG emissions with an allocation method based on mass, energy, and financial shares. The article reviews recent advances that have the potential to enable a sustainable energy transition, a green economy, and carbon neutrality in the biofuels sector. The paper shows that the technology used for the production of biodiesel is of great importance for sustainable development. The possibility of using renewable raw materials for the production of fuels leads to a reduction in the consumption of fossil fuels and lower emission of pollutants. It showed that during the combustion of biodiesel, the percentages of released gas components, with the exception of nitrogen oxides, which increased by 13%, were significantly lower: CO2—78%, CO—43%, SO2—100%, PM10—32%, and volatile hydrocarbons—63%. Moreover, it was found that biodiesel undergoes five times faster biodegradation in the environment than diesel oil.

This article presents the experimental and numerical analysis behavior on Mechanically Stabilized Earth Wall (MSE) under applied overburden load performed on the 1.5 m high, 0.9 m width, and 1.2 m length reinforced with deformed steel bars embedded in sand alone and tires shred-sand mixture. The study investigates how deformed bars, strength, and geometry affect the failure mechanism. The top of the wall was laden with additional overburden weight at various stages to explore the pre-failure wall behavior. The horizontal displacements were measured using potentiometers of the wall face and by potentiometers placed at the top of the loading plate. The results of the observations were compared to the analysis results derived from a numerical model created using the Plaxis 3D software. Numerical modeling was also applied to assess the behavior of MSE wall (3D model) on the failure mechanism of the walls. The parameters for the numerical models were derived from independent tests results, which were compared with the experimental observations. A good level of agreement with measurements was confirmed for the 3D model with the experimental data. From the results, it was deduced that at 30 kPa and 40 kPa, the tire shred-sand mixture with reinforcement gave a 36% and 58% reduction in face deflection compared to sand with reinforcement. The difference between numerical and experimental values ranges from 12% to 15%.