The etching of SiO2 layers on silicon with HF/H2O vapor mixtures using a N2 gas flow as a carrier was studied. The differences between the etching process of SiO2 on silicon using HF in water solutions and the gaseous etching process were investigated using x-ray photoelectron spectroscopy analysis. The experiments focused on the removal of thin (native) oxide layers. It is shown that HF gas etching yields a good and reproducible removal of the suboxide (SiOx) interface layer. Various parameters influencing the etching process are discussed. In our experiments the HF-gas etch proved to be superior to the liquid-HF etch with respect to the removal of the SiOx layer. After the HF gas etching process a logarithmic regrowth of an oxide layer in air occurs at a rate of 0.2 to 0.3 nm/decade (time in hours). Flashing HF gas etched samples to 700 °C for 2–3 min under ultrahigh vacuum conditions results in complete removal of oxygen.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.