Solid imidazolium-based poly(ionic liquid)s with variable molecular weights that contain the poly[2-(1-butylimidazolium-3-yl)ethyl methacrylate] (BIEMA) cation and different counter anions were evaluated in terms of CO2 capture and compared with classical ionic liquids with similar counter anions. In addition to poly(ionic liquid)s with often-applied ions such as BF4 (-) , PF6 (-) , NTf2 (-) , trifluoromethanesulfonate (OTf(-) ) and Br(-) , for the first time [BIEMA][acetate] was synthesised, which revealed a remarkably high CO2 sorption performance that exceeded the poly(ionic liquid)s studied previously on average by a factor of four (12.46 mg gPIL (-1) ). This study provides an understanding of the factors that affect CO2 sorption and a comparison of the CO2 capture efficiency with the frequently used sorbents. Moreover, all the studied sorbents were reusable if regenerated under carefully selected conditions and can be considered as suitable candidates for CO2 sorption.

Continuous cyclization of citronellal over zeolite-based extrudates was performed in a trickle-bed reactor at 35−70 °C and 10 bar of argon. Catalytic results were correlated with the physicochemical properties of the shaped catalyst prepared by extrusion of β or Y zeolites with binders. Rheological tests were used to elucidate the flow properties of a catalytic slurry and relate them with the extrusion performance. This study revealed that application of methylcellulose and bentonite binder modified the textural and acidic properties of the final extrudates. The main product was (−)-isopulegol at all temperatures with selectivity remaining quite constant with time-on-stream. The results illustrated that a binder such as bentonite cannot be considered inert. The mass-transfer limitations observed in extrudates did not significantly influence selectivity to the desired pulegols. This study also showed that a direct transfer of the batch reactor data to industrial continuous operation in citronellal cyclization is not straightforward.

No abstract

Suberin fatty acids were extracted from outer bark of Silver birch (Betula pendula Roth.) using an isopropanolic sodium hydroxide solution. Laboratory sheets composed of lignocellulosic fiber networks were prepared from unbleached and unrefined softwood kraft pulp and further impregnated with suberin fatty acid monomers and cured with maleic anhydride in ethanol solution. The treatment resulted in hydrophobic surfaces, in which the contact angles remained over 120 degrees during the entire measurement. The fiber network also retained its water vapor permeability and enhanced fiber–fiber bonding resulted in improved tensile strength of the sheets. Scanning electron microscopy (SEM) images revealed that the curing agent, together with suberin fatty acids, was evenly distributed on the fiber surfaces and smoothing occurred over the wrinkled microfibrillar structure. High concentrations of the curing agent resulted in globular structures containing betulinol derivates as revealed with time-of-flight secondary ion mass spectrometry (ToF-SIMS). Also, the larger amount of suberin fatty acid monomers slightly impaired the optical properties of sheets.

A highly conducting water-based ink composed of cellulose nanocrystals and polyaniline was prepared for flexographical printing by the emulsion polymerization approach.