We report an alternative random laser (RL) architecture based on a flexible and ZnO-enriched cellulose acetate (CA) fiber matrix prepared by electrospinning. The electrospun fibers, mechanically reinforced by polyethylene oxide and impregnated with zinc oxide powder, were applied as an adsorbent surface to incorporate plasmonic centers (silver nanoprisms). The resulting structures – prepared in the absence (CA-ZnO) and in the presence of silver nanoparticles (CA-ZnO-Ag) - were developed to support light excitation, guiding and scattering prototypes of a RL. Both materials were excited by a pulsed (5 Hz, 5 ns) source at 355 nm and their fluorescence emission monitored at 387 nm. The results suggest that the addition of silver nanoprisms to the ZnO- enriched fiber matrix allows large improvement of the RL performance due to the plasmon resonance of the silver nanoprisms, with ~80% reduction in threshold energy. Besides the intensity and spectral analysis, the RL characterization included its spectral and intensity angular dependences. Bending the flexible RL did not affect the spectral characteristics of the device. No degradation was observed in the random laser emission for more than 10,000 shots of the pump laser.

No abstract

No abstract

Electrospun fiber-based random lasers are environment-friendly flexible systems in which waveguiding/scattering processes provided by their structure with a broad distribution of diameters are essential elements to generate a suitable lasing mechanism.

The development of highly conductive, flexible, mechanical reinforced and chemically modified cotton yarns for electrodes of supercapacitors represents an important advance in the energy storage devices applied in wearable electronics. The production of carbon-based conductive layers as supports for chemical polymerization of active polymeric materials (such as polypyrrole) is an important strategy that associates the high electrical double-layer capacitance of the carbon derivatives (carbon nanotubes and graphene nanoplatelets) and the pseudocapacitance of the polypyrrole in truly flexible devices with improved electrochemical response-high capacitance. These properties are affected by relative concentration of graphene nanoplatelets in carbon complexes due to the variation in overall conductivity of electrodes (in consequence of low aggregation degree and available surface area) and the electrochemical properties of the resulting devices that reaches capacitance in order of 45.5 F g −1 with a capacitive retention of 70% after 2000 cycles of use. These promising results open possibilities for new systems in wearable electronics.