ResumoMateriais sustentáveis estão sendo investigados para substituir os materiais sintéticos, os compósitos com matriz polimérica têm sido aplicados em componentes, tais como capacetes e blindagem para os quais a resistência em um requisito importante. O presente trabalho avalia a classificação energética de impacto Charpy e Izod da matriz de epóxi compósitos DGEBA / TETA, reforçado com até 30% em volume de fibras de malva contínuas e alinhadas (Urena Lobata, L). Os testes de impacto foram realizados em amostras padronizadas em matriz de epoxi obtidas por aplicação de pressão em molde com cura a temperatura ambiente por 24 horas. Os resultados mostraram aumento significativo da energia de impacto com a fracção de fibras incorporadas de malva. A superfície de fratura foi analisada por microscopia eletrônica de varredura, SEM. O desempenho das amostras incorporados com 30% de fibras, sofreu apenas ruptura parcial devido a dificuldades impostas ao quebrar-se as fibras, e, consequentemente, a natureza dos quais fendas tendem a propagar na interface entre a matriz de fibra / resina epóxi, o que ajuda a absorver a energia do impacto. Palavras-chave: Malva; Compósitos; Matriz epóxi; Impacto Charpy; Impacto Izod; Ductilidade.
IMPACT ENERGY RATING CHARPY AND IZOD REACHED IN POLYMER COMPOSITES INCORPORATED WITH MALVA FIBERS AbstractEnvironmentally friendly materials are currently being investigated to replace synthetic materials, the polymer matrix composites have been applied in components such as helmets and shielding for which toughness in a major requirement. The present work evaluates the Charpy and Izod impact energy rating of epoxy matrix composites DGEBA/TETA, reinforced with up to 30% in volume of continuous and aligned malva fibers(Urena Lobata,L).The impact tests were performed on standard specimens obtained by pressing mold cure epoxy after 24 hours. The results showed significant increase in impact energy with the fraction of incorporated of malva fibers. The fracture surface was analyzed by scanning electron microscopy, SEM. The performance of the samples incorporated with 30% of fibers, suffered only partial rupture due to difficulty imposed by breaking the fibers themselves, and accordingly, the nature of which cracks tend to propagate at the interface between fiber/epoxy matrix, which helps to absorb impact energy.
ResumoNestes dias materiais ecológicos como compósitos com fibras naturais em matriz polimérica estão chamando a atenção de pesquisadores científicos, devido ao seu bom desempenho na substituição de materiais como madeira, polímeros à base de petróleo e outros. Neste trabalho foram avaliadas as propriedades de tração de compósitos de matriz epóxi reforçados com diferentes espécimes de fibras lignocelulósicas. Compósitos reforçados com até 30% em volume de fibras longas, contínuas e alinhadas de malva, sisal e bambu foram testados em uma máquina Instron a temperatura ambiente. A fratura foi analisada por SEM. Os resultados mostraram alterações significativas nas propriedades mecânicas com a quantidade dessas fibras. Estas propriedades mecânicas foram comparados com outros resultados em compósitos testados em ensaio de tração. A análise da fratura revelou uma fraca interação da interface fibra / matriz, o que poderia ser responsável por um maior desempenho de algumas propriedades. Palavras-chave: Fibras de malva; Sisal; Bambu; Matriz Epoxi; Ensaio tração.
TENSILE PROPERTIES OF EPOXY COMPOSITES REINFORCED WITH CONTINUOUS MALVA, SISAL AND BAMBOO FIBERS AbstractIn these days environmentally friendly materials as composites with natural fibers in polymeric matrix are gained attention of scientific researchers, due to its good performance in the replacement of materials such as wood, petroleum-based polymers and other. In this work the tensile properties of DGEBA/TETA epoxy matrix composites reinforced with different specimens of lignocellulosic fibers were evaluated. Composites reinforced with up to 30% in volume of long, continuous and aligned malva, sisal, and bamboo fibers were room temperature tested in an Instron machine. The fracture was analyzed by SEM. The results showed significant changes in the mechanical properties with the amount of those fibers. These mechanical properties were compared with other tensile-tested composites results. The fracture analysis revealed a weak fiber/matrix interface, which could be responsible for the higher performance of some properties.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.