No abstract

No abstract

A large closed wire loop is generally used in field experiments for testing airborne electrical exploration equipment. Thus, methods are required for the precise calculation of an electromagnetic response in the presence of a closed wire loop. We develop a fast and precise scheme for calculating the transient response for such a closed loop laid out at the surface of a horizontally layered conductive ground. Our scheme is based on the relationship between the magnetic flux flowing through a closed loop and the current induced in it. The developed scheme is compared with 2D and 3D finite‐element modelling for several positions of an airborne electromagnetic system flying over a closed loop. We also study the coupling effect between the current flowing in the closed loop and the current flowing in the horizontally layered conductive medium. The result shows that for the central position of the transmitter, the difference between axisymmetrical finite‐element modelling and our scheme is less than 1%. Moreover, for the non‐coaxial transmitter–receiver–loop system, the solution obtained by our scheme is in good agreement with full 3D finite‐element modelling, and our total simulation time is substantially lower: 1 minute versus 120 hours.

No abstract

We propose the approach to 3D inversion of airborne electromagnetic data, which is intended for discovering subvertical bodies overlapped by essentially inhomogeneous conductive layers. The approach is based on the geometric inversion in which a geoelectrical medium is parameterized with the use of block structures. During the inversion, the coordinates of the borders between the blocks and the rows of the blocks as well as resistivities inside them are determined. In order to solve the forward problem of the airborne electromagnetic survey, we use the non‐conforming optimized mesh with the hexahedral cells, which enables us to reduce the number of degrees of freedom and smoothly approximate the curved borders of a geological medium. For a more reliable discovery of subvertical objects, we propose to carry out 3D inversions at several rotations of block structures relative to the flight lines. The workability of this approach is demonstrated using the data which are synthesized for complex geoelectrical models with topography, inhomogeneous overlapping layers and target subvertical bodies oriented differently relative to the flight lines. The results of this investigation show that, in some way or other, the elongated subvertical object is discovered and its orientation (the direction of its long side) is defined at different rotations of block structures used in 3D inversions. However, the most accurate recovery of the subvertical object length is achieved when the direction of its long side almost coincides with the direction of one of the block structures axes. Thus, the block structures rotations allow not only more reliably discovering a target object in complex geoelectrical conditions, but also more exactly defining its orientation and length.