This study aimed to investigate the treatment efficiency of a synthetic dye solution in an anaerobic-aerobic combined reactor system, using pretreated residual yeast as a nutrient source and redox mediator. The applicability of the residual yeast as a nutrient source was firstly evaluated in anaerobic batch tests. Subsequently, two continuous bench-scale treatment settings were studied: (1) an Upflow Anaerobic Sludge Blanket (UASB) reactor followed by an activated sludge system and, (2) a UASB reactor followed by a shallow polishing pond. The two system configurations were fed with a synthetic azo dye solution of Yellow Gold Remazol (50 mg/L) and pretreated residual yeast (350 mg/L). According to the results, the UASB/shallow polishing pond-combined reactor attained the best values of chemical oxygen demand (COD) (85%) and dye removal (23%).

No abstract

Color removal from textile effluents was evaluated using a laboratory-combined process based on an upflow anaerobic sludge blanket (UASB) reactor followed by a shallow polishing pond (SPP). The anaerobic reactor was fed with a real textile effluent, diluted 10-times in a 350 mg/L solution of pre-treated residual yeast extract from a brewery industry as nutrient source. The parameters color, COD, N-NH3 and toxicity were monitored throughout 45 days of operation. According to the results, decolorization and COD removal were highest in the anaerobic step, whereas the effluent was polished in the SPP unit. The overall efficiency of the complete UASB-SPP system for COD and color were 88 and 62%, respectively. Moreover, the N-NH3 generated by the residual yeast extract ammonification was below 5 mg/L for the final effluent. Finally, no toxicity was detected after the treatment steps, as shown by the Vibrio fischeri microscale assay.

No abstract

No abstract