Cancer incidence appears to be higher amongst firefighters compared to the general population. Given that many cancers have an environmental component, their occupational exposure to products of carbon combustion such as polycyclic aromatic hydrocarbons (PAHs) is of concern. This is the first UK study identifying firefighters exposure to PAH carcinogens. Wipe samples were collected from skin (jaw, neck, hands), personal protective equipment of firefighters, and work environment (offices, fire stations and engines) in two UK Fire and Rescue Service Stations. Levels of 16 US Environmental Protection Agency (EPA) PAHs were quantified together with more potent carcinogens: 7,12-dimethylbenzo[a]anthracene, and 3-methylcholanthrene (3-MCA) (12 months post-initial testing). Cancer slope factors, used to estimate cancer risk, indicate a markedly elevated risk. PAH carcinogens including benzo[a]pyrene (B[a]P), 3-MCA, and 7,12-dimethylbenz[a]anthracene PAHs were determined on body surfaces (e.g., hands, throat), on PPE including helmets and clothing, and on work surfaces. The main exposure route would appear to be via skin absorption. These results suggest an urgent need to monitor exposures to firefighters in their occupational setting and conduct long-term follow-up regarding their health status.

Isocyanates are a group of low molecular weight, highly reactive compounds with a functional isocyanate group. The main human exposure route is via inhalation of airborne isocyanates, although dermal exposure has also been reported. The inhalation of isocyanates is associated with severely adverse health effects such as asthma, inflammation in the respiratory tract and cancer. During thermal degradation of polyurethane materials, airborne isocyanates can be sampled in the fire effluent. This paper discusses the reactivity and commercial applications of isocyanates and the generation of airborne isocyanates during thermal degradation, the human health effects as well as the environmental fate of some of the most commercially important isocyanates. This is followed by a review of the generation of isocyanates from large-scale fire testing and bench-scale test methods as well as sampling techniques and derivatisation agents necessary to stabilise the isocyanates and analysis.

Inhalation of airborne isocyanates is associated with acute asthma attacks and inflammation in the respiratory tract as well as cancer. These highly reactive compounds are used as monomers in various applications such as foams for insulation materials and upholstery furniture and are therefore commonly found in fire smoke from insulation materials, such as rigid polyisocyanurate (PIR) foams. Consequently, there is an increasing concern regarding the potential adverse health effects they may cause during this type of exposure.The aim of this study was to investigate the stability of generated isocyanates from aerobic pyrolysis of PIR after sampling in the derivatization solution as well as after sample preparation to establish the optimal storage conditions and rate of degradation. Both airborne and particle-bound isocyanates were collected, using dibutylamine as derivatization agent in a midget impinger and impregnated filter after the impinger. The rapid degradation of the generated isocyanates after sampling emphasizes the need for a prompt sample preparation and analysis, in particular for the collected mono-isocyanates, as the concentration decreased by 50% within 4-8 h.