No abstract

In intensively managed landscapes, interactions between surface (tillage) and subsurface (tile drainage) management with prevailing climate/weather alter landscape characteristics, transport pathways, and transformation rates of surface/ subsurface water, soil/sediment, and particulate/dissolved nutrients. To capture the high spatial and temporal variability of constituent transport and residence times in the critical zone (between the bedrock and canopy) of these altered landscapes, both storm event and continuous measurements are needed. The Intensively Managed Landscapes Critical Zone Observatory (IML-CZO) is comprised of three highly characterized, well instrumented, and representative watersheds (i.e., Clear Creek, Iowa; Upper Sangamon River, Illinois; and Minnesota River, Minnesota). It is organized to quantify the heterogeneity in structure and dynamic response of critical zone processes to human activities in the context of the glacial and management (anthropogenic) legacies. Observations of water, sediment, and nutrients are made at nested points of the landscape in the vertical and lateral directions during and between storm events (i.e., continuously). The measurements and corresponding observational strategy are organized as follows. First, reference measurements from surface soil and deep core extractions, geophysical surveys, lidar, and hyperspectral data, which are common across all Critical Zone Observatories, are available. The reference measurements include continuous quantification of energy, water, solutes, and sediment fluxes. The reference measurements are complemented with event-based measurements unique to IML-CZO. These measurements include water table fluctuations, enrichment ratios, and roughness as well as bank erosion, hysteresis, sediment sources, and lake/floodplain sedimentation. The coupling of reference and event-based measurements support testing of the central hypothesis (i.e., system shifts from transformer to transporter in IML-CZO due to the interplay between management and weather/climate). Data collected since 2014 are available through a data repository and through the Geodashboard interface, which can be used for process-based model simulations.

No abstract

A low-cost, noninvasive, three-dimensional (3D), particle tracking velocimetry system was designed and built to investigate particle movement in match-index-refraction porous media. Both a uniform load of the glass beads of the same diameter and a binary load of the glass beads of two diameters were used. The purpose of the experiments is to study the effect of the two loads on the trajectories, velocity distribution, and spreading of small physical particles. A total of 35 particles were released and tracked in the uniform load and 46 in the binary load. The 3D trajectory of each particle was recorded with two video camcorders and analyzed. It is found that the particle's velocity, trajectory, and spreading are very sensitive to its initial location and that the smaller pore size or heterogeneity in the binary load increases the particles' velocity and enhances their spreading as compared with the uniform load. The experiments also verified the previous finding that the distribution of the particle velocities are lognormal in the longitudinal direction and Gaussian in two transverse directions and that the particle spreading is much larger along the longitudinal direction than along the traverse directions.

Aseptic loosening from polyethylene wear debris is the leading cause of failure for metal-on-polyethylene total hip implants. Third-body debris ingress to the bearing space results in femoral head roughening and acceleration of polyethylene wear. How third-body particles manage to enter the bearing space between the closely conforming articulating surfaces of the joint is not well understood. We hypothesize that one such mechanism is from convective fluid transport during subluxation of the total hip joint. To test this hypothesis, a three-dimensional (3D) computational fluid dynamics (CFD) model was developed and validated, to quantify fluid ingress into the bearing space during a leg-cross subluxation event. The results indicated that extra-articular joint fluid could be drawn nearly to the pole of the cup with even very small separations of the femoral head (<0.60mm). Debris suspended near the equator of the cup at the site of maximum fluid velocity just before the subluxation began could be transported to within 11 degrees from the cup pole. Larger head diameters resulted in increased fluid velocity at all sites around the entrance to the gap compared to smaller head sizes, with fluid velocity being greatest along the anterosuperolateral cup edge, for all head sizes. Fluid pathlines indicated that suspended debris would reach similar angular positions in the bearing space regardless of head size. Increased inset of the femoral head into the acetabular cup resulted both in higher fluid velocity and in transport of third-body debris further into the bearing space.