While colloidal chemistry provides ways to obtain a great variety of nanoparticles, with different shapes, sizes, material composition, and surface functions, their controlled deposition and combination on arbitrary positions of substrates remains a considerable challenge. Over the last ten years, optical printing arose as a versatile method to achieve this purpose for different kinds of nanoparticles. In this article we review the state of the art of optical printing of single nanoparticles, and discuss its strengths, limitations, and future perspectives, by focusing on four main challenges: printing accuracy, resolution, selectivity, and nanoparticles photostability.
Arsenic is one of the most toxic elements in natural waters since prolonged exposure to this metalloid can cause chronic damage to health. Its removal from ground-water remains one of...
RESUMENSe realizó la síntesis de nanobastones de oro monodispersos con una eficiencia superior al 80% sobre el total de nanopartículas, caracterizado por una resonancia plasmónica longitudinal cercana a los 800 nm. Se modificaron superficialmente sustratos de vidrio y se los recubrió con los nanobastones sintetizados, con control de la densidad superficial. Se monitoreó la dinámica del recubrimiento a través de espectros de extinción, y se observó una densidad máxima de saturación dada por repulsión electrostática y un tiempo característico del proceso. Luego de alcanzada la saturación de nanobastones por unidad de área se observa un ensanchamiento de las resonancias hacia el infrarrojo, debido a interacciones entre los nanobastones por producirse agregaciones sobre la superficie. Estos resultados tienen aplicación inmediata en el diseño y fabricación de dispositivos plasmónicos, por ejemplo en el sensado molecular.Palabras clave: Nanobastones de oro, Plasmónica, Sustratos nanoestructurados. ABSTRACTMonodispersed gold nanorods were synthesized with efficiency above 80% of all nanoparticles, characterized by longitudinal plasmon resonance around 800 nm. Glass substrates were surface modified and covered with the synthesized nanorods with control of surface density. Coverage dynamics was monitored through extinction spectra, and a saturation maximum density was observed, given by electrostatic repulsion, and a characteristic time of the process. A widening of the resonance towards the infrared is observed after reaching the saturation of nanorods per unit area, due to interactions between nanorods on account of surface aggregation. These results have immediate application in the design and manufacture of plasmonic devices, for example in molecular sensing.Keywords: Gold nanorods, Plasmonics, Nanostructured substrates. INTRODUCCIÓNUno de los objetivos de la plasmónica es el control preciso de las propiedades ópticas de la materia nanoestructurada con el fin de lograr, por ejemplo, sensores eficientes y sensibles [1,2], fuentes de luz ultra compactas [3], espectroscopías de moléculas individuales [4,5], terapias fototérmicas contra el cáncer [6,7], microscopías ópticas de resolución nanométrica [8,9], celdas solares [10], entre otras aplicaciones. Para lograr esto es indispensable el diseño a medida de nanoestructuras, su fabricación con alta eficiencia y repetitividad, y el control preciso de sus formas y dimensiones.En esta línea, los nanobastones de oro (NBOs) son atractivos por su simplicidad y porque poseen resonancias plasmónicas superficiales en el rango visible e infrarrojo del espectro electromagnético. La longitud de onda de estas resonancias depende, entre otros factores, de las dimensiones de los NBOs. Si se tiene control sobre su relación de aspecto se puede sintonizar una resonancia relativamente angosta [11]. De este modo es posible construir un dispositivo plasmónico resonante a una longitud de onda deseada, sintetizando NBOs de dimensiones adecuadas y fabricando una nanoestructura usando los NBOs co...
Desarrollamos un protocolo de síntesis de nanoestructuras catalíticas bifuncionales, con propiedades plasmónicas y magnéticas, conformadas por nanoesferas de oro adsorbidas sobre un núcleo magnético de Fe3O4, para ser utilizadas en la remediación de aguas con arsénico. El diseño está basado en que las nanopartículas de oro actúen como catalizadores en la oxidación de la especie As(III) a la menos tóxica As(V), y bajo iluminación resonante aceleren aún más la reacción. La superficie de Fe3O4 actúa como sitio activo para la adsorción de arsénico y puede ser fácilmente removible del agua mediante un imán. Estudiamos las isotermas de adsorción y la respuesta óptica y magnética de este nanosistema.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.