No abstract

A hydroxy-sodalite/cancrinite zeolite composite was synthesized from low-grade calcite-bearing kaolin by hydrothermal alkali-activation method at 160 • C for 6 h. The effect of calcite addition on the formation of the hydroxy-sodalite/cancrinite composite was investigated using artificial mixtures. The chemical composition and crystal morphology of the synthesized zeolite composite were characterized by X-ray powder diffraction, infrared spectroscopy, scanning electron microscopy, and N 2 adsorption/desorption analyses. The average specific surface area is around 17-20 m 2 ·g −1 , whereas the average pore size lies in the mesoporous range (19-21 nm). The synthesized zeolite composite was used as an adsorbent for the removal of heavy metals in aqueous solutions. Batch experiments were employed to study the influence of adsorbent dosage on heavy metal removal efficiency. Results demonstrate the effective removal of significant quantities of Cu, Pb, Ni, and Zn from aqueous media. A comparative study of synthesized hydroxy-sodalite and hydroxy-sodalite/cancrinite composites revealed the latter was 16-24% more efficient at removing heavy metals from water. The order of metal uptake efficiency for these zeolites was determined to be Pb > Cu > Zn > Ni. These results indicate that zeolite composites synthesized from natural calcite-bearing kaolin materials could represent effective and low-cost adsorbents for heavy metal removal using water treatment devices in regions of water shortage.

No abstract

Xenobiotics in urban receiving waters are an emerging problem. A sound knowledge of xenobiotic input, distribution and fate in the aquatic environment is a prerequisite for risk assessments. Methods to assess the impact of xenobiotics on urban receiving waters should address the diverse characteristics of the target compounds and the spatiotemporal variability of concentrations. Here, we present results from a one-year-monitoring program concerning concentrations of pharmaceuticals, additives from personal care products and industrial chemicals in an urban drainage catchment in untreated and treated wastewater, surface water and groundwater. Univariate and multivariate statistical methods were applied to characterize the xenobiotic concentrations. Correlation and principal component analysis revealed a pronounced pattern of xenobiotics in the surface water samples. The concentrations of several xenobiotics were characterized by a negative proportionality to the water temperature. Therefore, seasonal attenuation is assumed to be a major process influencing the measured concentrations. Moreover, dilution of xenobiotics the surface water was found to significantly influence the concentrations. These two processes control more the xenobiotic occurrence in the surface water than the less pronounced concentration pattern in the wastewater sources. For the groundwater samples, we assume that foremost attenuation processes lead to the found differentiation of xenobiotics.

No abstract