The paper shows the results of an experimental tests campaign carried out on concretes with recycled aggregates added in substitution of sand. Sand, in fact, has been totally replaced once by blast-furnace slag and fly ashes, once by blast-furnace slag and microsilica. The aim is both to utilize industrial by-products and to reduce the use of artificial aggregates, which impose the opening of pits with high environmental damage. The results show that in the concretes so made the water absorption capacity has reduced and durability has improved. The test campaign and the results described in the present article are certainly useful and can be especially utilized for research on a larger scale in this field.

In the present paper a new and innovative way to approach the regeneration of public buildings and public housing is proposed. It consists in a dissipative steel frame to reduce the displacement demand and to improve the energy efficiency of a real existing structure, inserting buckling-restrained axial dampers (BRAD) type dissipative braces. This system is adaptable to any construction made of reinforced concrete frames and improves energy efficiency and earthquake-resistant performance; moreover, it upgrades the aesthetics of buildings and the quality of life for the users. In fact, the system is capable of assuming different and pleasant architectural shapes offering benefits in terms of earthquake-resistant performance, energy saving, and energy production from renewable sources. The attention to the aesthetic results renders the intervention a redevelopment strategy not only on an architectural scale, but also in the urban contexts for degraded and marginalized suburbs. The performances of the proposed kit were evaluated on a case study consisting in a social house located in the south of Italy. Numerical analyses have been carried out and the results have been reported both from the seismic protection and energy efficiency points of view. As a result, the produced renewable energy from the retrofitting system and the building seismic capacity increased. A rapid and precise control process, able to return a suitable structural dimensioning of the frame, according to the different application contexts, is finally proposed.

No abstract

This paper shows the results of an experimental analysis on the bell tower of "Chiesa della Maddalena" (Mola di Bari, Italy), to better understand the structural behavior of slender masonry structures. The research aims to calibrate a numerical model by means of the Operational Modal Analysis (OMA) method. In this way realistic conclusions about the dynamic behavior of the structure are obtained. The choice of using an OMA derives from the necessity to know the modal parameters of a structure with a non-destructive testing, especially in case of cultural-historical value structures. Therefore by means of an easy and accurate process, it is possible to acquire in-situ environmental vibrations. The data collected are very important to estimate the mode shapes, the natural frequencies and the damping ratios of the structure.To analyze the data obtained from the monitoring, the Peak Picking method has been applied to the Fast Fourier Transforms (FFT) of the signals in order to identify the values of the effective natural frequencies and damping factors of the structure. The main frequencies and the damping ratios have been determined from measurements at some relevant locations. The responses have been then extrapolated and extended to the entire tower through a 3-D Finite Element Model. In this way, knowing the modes of vibration, it has been possible to understand the overall dynamic behavior of the structure.