The poly(lactic-co-glycolic acid), known as PLGA, is one of the main bioreabsorbable polymers used in the field of medicine today. This copolymer is widely applied in sutures, devices geared toward the controlled release of medication, and the guided regeneration of bone tissue as it presents a short degradation time. This work aimed to synthesize the 82/18 PLGA (expressed by the mass ratio of D,L-lactide and glycolide, respectively), to characterize and study the in vitro degradation in the form of rods in phosphate buffer solution (PBS). The copolymer was synthesized by opening the cyclic dimer rings of the monomers D,L-lactide and glycolide, in the presence of the tin octanoate initiator and of the lauryl alcohol co-initiator. The characterization of the copolymer and the follow-up of its in vitro degradation were studied using: Differential Scanning Calorimetry (DSC), Thermogravimetry (TG), Infrared Molecular Absorption Spectroscopy with Fourier Transform (FTIR), Rheometry, and Scanning Electron Microscopy (SEM). Through these characterization techniques, it was possible to obtain the glass transition temperature, thermal stability, chemical composition, morphology, and molar mass of both the synthesized and the degraded copolymer. The molar mass of the synthesized copolymer was, approximately, 10 6 g•mol −1. The degradation rate of PLGA significantly increased from the 19 th to the 28 th day in PBS. After 28 days in PBS, the glass transition temperature and the molar mass reduced from 45˚C to 17˚C and from 1.5 × 10 6 g•mol −1 to 7.5 × 10 4 g•mol −1 , respectively. The pH of the medium has a significant influence on the copolymer degradation profile. When it diminishes, it accelerates the degradation process, resulting in smaller PLGA polymer chains. This pH dependent degradation can be useful for drug release systems.
Blends of poly(vinyl alcohol) (PVA), poly-(acrylic acid), (PAA), and poly(vinyl pyrrolidone) (PVP), with poly(N-isopropylacrylamide) (PNIPAM), were prepared by casting from aqueous solutions. Mechanical properties of PNIPAM/PVA blends were analyzed by stressstrain tests. Differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were employed to analyze the miscibility between the polymeric pairs. The results revealed that PNIPAM is not miscible with PVA and PVP in the whole range of composition. On the other hand, PNIPAM interacts strongly with PAA forming interpolymer complex due to the formation of cooperative hydrogen bonds.
Films of collagen (CLG) and poly(N-isopropylacrylamide), PNIPAAm, were prepared by casting from water solutions. These bioartificial polymeric materials were studied to examine the influence of PNIPAAm content and glutaraldehyde vapor cross-linking on the thermal and biological stability of CLG. Mixtures, ranging from 20-80 wt% CLG composition, were cross-linked through exposure to glutaraldehyde vapors. Thermal and morphological properties of the films, cross-linked or not, were investigated by differential scanning calorimetry, thermogravimetry, and scanning electron microscopy, with the aim of evaluating miscibility, thermal stability, and interactions among the constituents. The experimental results indicated that the homopolymers are not thermodynamically compatible. However, there is good evidence that effective interactions, probably due to hydrogen bond formation, takes place between the constituents. These interactions are more evident on the samples that were not cross-linked. DSC studies revealed that PNIPAAm exerts a thermal stabilizing effect on uncross-linked CLG, while the cross-linking with glutaraldehyde affects only the biological polymer, preventing the interactions with PNIPAAm. SEM micrographs of the uncross-linked mixtures showed that the morphology, in all compositions studied, remains similar to the pure collagen. In the corresponding cross-linked samples, a more compact aggregation is observed although no appreciably changes can be seen.
Blends of poly(N-isopropylacrylamide) (PNIPAM) and an ethylene/vinyl alcohol copolymer (EVAL) were obtained through casting from dimethyl sulfoxide (DMSO) solutions and phase inversion in 50/50 DMSO/H 2 O solutions. The miscibility and morphology of the PNIPAM/EVAL blends were investigated with thermal and morphological analysis. Differential scanning calorimetry indicated that the crystallinity of EVAL decreased with increasing PNIPAM content and that the blends cast from DMSO/H 2 O solutions were miscible in the melt state. Measurements of the melting point depression allowed the determination of the interaction energy density (B) and FloryHuggins interaction parameter ( 12 ) with the Nishi-Wang equation. The negative B and 12 values obtained were examined in terms of the specific intermolecular interactions between the polymers. Scanning electron micrographs revealed that blends obtained by the casting method led to dense membranes, whereas the phase-inversion method rendered typical macroporous membranes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.