No abstract

No abstract

No abstract

No abstract

SummaryThe functional properties of corn starch based films were improved by incorporating nanoclay (Montmorillonite). Nanoclay was incorporated in the polymer matrix using two different methodologies and the films were formed by casting. The effect of film preparation methodology and of the nanoclay concentration on the physicochemical properties of the films was studied. Depending on film preparation method used, intercalated or exfoliated nanocomposite films were obtained. The FTIR spectra showed a strong interaction between the montmorillonite and the starch molecules. Opacity was dependent on the nanoclay dispersion method used. Water vapor solubility and permeability decreased with increasing montmorillonite content and were affected by the dispersion method. Water diffusion was only dependent on the nanoclay content due to the increase in tortuosity of the diffusion path, caused by the nanoparticles. The results showed that the incorporation of 5% of montmorillonite using an adequate dispersion method, improved the water resistance and barrier properties of corn starch based films. Nanoparticles reduced the damage caused to the properties of these hydrophilic films by the increase in moisture content.

No abstract

No abstract

SummaryIn the present study, a better knowledge of the influence of plasticizer content, storage relative humidity and film thickness on the mechanical properties of high amylose corn starch based films gelatinized at low temperature, is presented. The mechanical properties, tensile strength and percentage of elongation at break of high amylose corn starch films plasticized with glycerol were evaluated using tension tests. The films exhibited an increase in elongation and a decrease in tensile strength with increasing plasticizer concentration. When the glycerol level was high, some fissures were detected in the dry films, possible due to phase separation (starch-glycerol) phenomena. Film crystallinity is related to the reorganization capacity of the polymer chain, and thus the relative film crystallinity should increase with plasticizer content (glycerol and water). The mechanical properties were found to be strongly dependent on the water content due to the hydrophilic nature of starch films. The influence of moisture sorption on tensile strength was similar to that of plasticization with glycerol. The relationship between polymer chain mobility and water content explained this behavior. Elongation suffered a different effect and maximum values were reached at 45% relative humidity. The final drop in elongation was due to a softening of the structure at high relative humidity. The thicker the film the longer the drying time required, leading to greater relative crystallinity due to the corresponding increase in the possibility for chain reorganization. As a consequence, linear increases in tensile strength and elongation were observed with film thickness over the whole range studied (30 to 100 µm). Key words: Starch films; Mechanical properties; Tensile strength; Elongation at break; Crystallinity. Autores | Authors Maria Alejandra BERTUZZI Instituto de Investigaciones para la Industria Química (INIQUI -CONICET)Av. Bolivia 5150, A4408FVY Salta -Argentina e-mail: bertuzzi@unsa.edu.ar Juan Carlos GOTTIFREDI Margarita ARMADA Instituto de Investigaciones para la Industria Química (INIQUI-CONICET)Salta - Argentina, Mechanical properties of a high amylose content corn starch based film, gelatinized at low temperature Propriedades mecânicas de filme a base de amido de milho de alto teor de amilose gelatinizado em baixa temperatura Campinas, v. 15, n. 3, p. 219-227, jul./set. 2012 http://dx.doi.org/10.1590/S1981-67232012005000015 ResumoNo presente estudo, é apresentado um melhor conhecimento da influência do teor em plastificante, da umidade relativa de armazenamento e da espessura do filme nas propriedades mecânicas do filme baseado em amido de milho de alto conteúdo de amilose, gelatinizado em baixa temperatura. As propriedades mecânicas, a resistência à tração e a porcentagem de alongamento na ruptura dos filmes de amido de milho de alta amilose plastificados com glicerol foram avaliadas utilizando-se testes da tensão. Os filmes apresentaram aumento do alongamento na ruptura e diminuição da resistência à traç...