No abstract

The paper reports on the properties of UV-curable inorganic-organic hybrid polymer multimode optical channel waveguides fabricated by roll-to-plate (R2P) nanoimprinting. We measured transmission spectra, refractive indices of the applied polymer materials, and optimized the R2P fabrication process. Optical losses of the waveguides were measured by the cut-back method at wavelengths of 532, 650, 850, 1310, and 1550 nm. The lowest optical losses were measured at 850 nm and the lowest average value was 0.19 dB/cm, and optical losses at 1310 nm were 0.42 dB/cm and 0.25 dB/cm at 650 nm respectively. The study has demonstrated that nanoimprinting has great potential for the implementation of optical polymer waveguides not only for optical interconnection applications.

In this paper, electromagnetic shielding effectiveness of woven fabrics with high electrical conductivity is investigated. Electromagnetic interference-shielding woven-textile composite materials were developed from a highly electrically conductive blend of polyester and the coated yarns of Au on a polyamide base. A complete analytical model of the electromagnetic shielding effectiveness of the materials with apertures is derived in detail, including foil, material with one aperture, and material with multiple apertures (fabrics). The derived analytical model is compared for fabrics with measurement of real samples. The key finding of the research is that the presented analytical model expands the shielding theory and is valid for woven fabrics manufactured from mixed and coated yarns with a value of electrical conductivity equal to and/or higher than σ = 244 S/m and an excellent electromagnetic shielding effectiveness value of 25–50 dB at 0.03–1.5 GHz, which makes it a promising candidate for application in electromagnetic interference (EMI) shielding.

No abstract

No abstract

Deployment of UHF RFID technology in the industrial environment is not easy to perform because of the heterogeneity of the environment, the propagation of the high frequency radio signal, the interference, and the associated timeconsuming implementation. The paper deals with deployment and evaluation of developed autonomous system for measurement of UHF RFID signals in industrial environment. Such a system allows, in defined 3D real-world locations, to obtain autonomously information about the actual Received Signal Strength Indicator of the moving RFID tag (Etalon) that is registered while investigated with each antenna of RFID reader. A corridor was chosen as an experimental area, and Received Signal Strength Indicator was evaluated by both, simulation and measurement methods. The results show a statistically significant relationship between measured and modeled Received Signal Strength Indicator in dBm at the 99% confidence level. The presented autonomous system can contribute to a more comprehensive analysis of measuring the electromagnetic field emitted by the UHF RFID antennas in various industrial environments.

No abstract

No abstract