This paper investigates the use of an aqueous dispersion of polyethylene copolymer with a relatively high content of acrylic acid as a compatibilizer and as an alternative medium to obtain polyethylene CNF nanocomposites. The CNF content was varied from 1 to 90wt% and the appearance, optical, thermal, mechanical and rheological properties, as well the morphology of the films were evaluated. The PE/CNF films are transparent up to 20wt% of NFC indicating a good dispersion of CNF, but a poor distribution, with PE-rich and CNF-rich regions observed by SEM. Improved mechanical properties were achieved, with a 100% and 15,900% increase in the Young's modulus with 1wt% and 90wt% NFC, respectively. The rheological behavior indicated good melt processability. According to these results, aqueous polyolefin dispersions seem to be a promising, easy and relatively fast route for obtaining cellulose/polyolefins nanocomposites with low to high contents of cellulose nanofibrils.

No abstract

SbstractThe viability of recycling post-industrial packaging waste, compounded from multilayer laminated PET-PE films, for production of polymer blends with good physico-mechanical performance is analyzed. Initially, several PET-PE model-blends were prepared from fresh polymers and were compounded with different formulations, based on design of experiments (DOE). Polymer compatibilizers based on maleic anhydride (PE-g-MA) and glycidyl methacrylate (E-GMA) have been used to promote the compatibilization reaction. The physico-mechanical properties of the model-blends were evaluated by response surface methodology (RSM). Finally, the post-industrial waste was compounded with the same concentration of compatibilizers in the previous set of model-blends. The DOE methodology showed to be a useful tool for assessing the recycling, since it helped to produce recycled materials with acceptable physico-mechanical properties. Between both compatibilizers studied, PE-g-MA showed to be the best additive for compatibilization due to the presence of a polyamide component in the waste, which undergoes a kinetically favorable compatibilization reaction.

No abstract