This research deals with the characterization of black crusts collected from several historical buildings in the city of Venice. This city suffers from pollution from the industrial area of Marghera, as well as from the maritime traffic. Black crust can be considered as a passive sampler of pollutants, with particular reference to heavy metals. For this reason, in order to fully characterize those samples, several techniques were used, including scanning electron microscopy, thermogravimetric analysis, laser ablation inductively coupled plasma mass spectrometry, infrared spectroscopy and ion chromatography. This integrated approach allowed us to gain information about the mineralogical phases and the elements within the crusts giving the possibility to identify the pollution sources causing the stone decay within the buildings, as well as the variability in composition depending on the exposure of the analyzed

No abstract

The control of heat at the nanoscale via the excitation of localized surface plasmons in nanoparticles (NPs) irradiated with light holds great potential in several fields (cancer therapy, catalysis, desalination). To date, most thermoplasmonic applications are based on Ag and Au NPs, whose cost of raw materials inevitably limits the scalability for industrial applications requiring large amounts of photothermal NPs, as in the case of desalination plants. On the other hand, alternative nanomaterials proposed so far exhibit severe restrictions associated with the insufficient photothermal efficacy in the visible, the poor chemical stability, and the challenging scalability. Here, it is demonstrated the outstanding potential of NiSe and CoSe topological nodal‐line semimetals for thermoplasmonics. The anisotropic dielectric properties of NiSe and CoSe activate additional plasmonic resonances. Specifically, NiSe and CoSe NPs support multiple localized surface plasmons in the optical range, resulting in a broadband matching with sunlight radiation spectrum. Finally, it is validated the proposed NiSe and CoSe‐based thermoplasmonic platform by implementing solar‐driven membrane distillation by adopting NiSe and CoSe nanofillers embedded in a polymeric membrane for seawater desalination. Remarkably, replacing Ag with NiSe and CoSe for solar membrane distillation increases the transmembrane flux by 330% and 690%, respectively. Correspondingly, costs of raw materials are also reduced by 24 and 11 times, respectively. The results pave the way for the advent of NiSe and CoSe for efficient and sustainable thermoplasmonics and related applications exploiting sunlight within the paradigm of the circular blue economy.

This paper aims to carry out an archaeometric characterization of mortar samples taken from an underwater environment. The fishpond of the archaeological site of Castrum Novum (Santa Marinella, Rome, Italy) was chosen as a pilot site for experimentation. The masonry structures reached the maximum thickness at the apex of the fishpond (4.70 m) and consisted of a concrete conglomerate composed of slightly rough stones of medium size bound with non-hydraulic mortar. After sampling, for a complete characterization of selected mortar fragments, different and complementary techniques (stereomicroscopy, polarizing optical microscopy, and X-ray powder diffraction analysis) were carried out in order to: a) define the minero-petrographic features; and b) investigate their state of conservation. The obtained data allowed the determination of the main constituents of mortars from a compositional point of view. The raw materials, in fact, were quite homogeneous, as well as the ratio in which they were mixed, confirming the typical "recipe" used in Roman times to manufacture hydraulic-type mortars by adding pozzolana. At the same time, it was possible to identify the various degradation processes we were interested in, namely, biological colonization (bio-fouling) that develops differently according to environmental conditions. Based on characterization phase results, the research will help to develop adequate techniques for intervention (innovative tools and methods for the protection of underwater cultural heritage) with particular regard to cleaning and consolidating procedures to be carried out directly in situ.

No abstract

No abstract

In this study, novel asymmetric integral cation exchange membranes were prepared by the wet phase inversion of sulfonated polysulfone (SPSf) solutions. SPSf with different degrees of sulfonation (DS) was synthesized by variation in the amount of chlorosulfonic acid utilized as a sulfonating agent. The characterization of SPSf samples was performed using FTIR and 1H-NMR techniques. SPSf with a DS of 0.31 (0.67 meq/g corresponding ion exchange capacity) was chosen to prepare the membranes, as polymers with a higher DS resulted in poor mechanical properties and excessive swelling in water. By a systematic study, the opportunity to tune the properties of SPSf membranes by acting on the composition of the polymeric solution was demonstrated. The effect of two different phase inversion parameters, solvent type and co-solvent ratio, were investigated by morphological and electrochemical characterization. The best properties (permselectivity of 0.86 and electrical resistance of 6.3 Ω∙cm2) were obtained for the membrane prepared with 2-propanol (IPA):1-Methyl-2-pyrrolidinone (NMP) in a 20:80 ratio. This membrane was further characterized in different solution concentrations to estimate its performance in a Reverse Electrodialysis (RED) operation. Although the estimated generated power was less than that of the commercial CMX (Neosepta) membrane, used as a benchmark, the tailor-made membrane can be considered as a cost-effective alternative, as one of the main limitations to the commercialization of RED is the high membrane price.

No abstract