No abstract

Ultra densification of the number of antennas combined with the use of large bandwidths in the millimeter wave (mmWave) spectrum is considered one of the main methodologies to achieve the quality of service requirements for future generations of wireless communications. Massive multipleinput multiple-output (mMIMO) cell-free (CF) systems have a large number of access points (APs) distributed in the coverage area, serving simultaneously a smaller number of users consuming the same timefrequency resources. In order to support realistic CF networks designs, this work proposes a performance analysis based on ray tracing simulations. The propagation modeling considers reflection, diffraction, diffuse scattering, atmospheric molecular absorption and foliage and rainfall losses. CF networks with APs equipped with multiple antennas operating in the 26 GHz, 38 GHz and 73 GHz bands are evaluated. From the simulation results, the communication channel is characterized and parameterized. Different performance analysis of CF networks are performed, based on downlink spectral efficiency. In addition, the performance of CF networks in rainy environments is evaluated, and it has been observed that this architecture promotes resistance to the effect of rain attenuation.INDEX TERMS cell-free, massive MIMO, millimeter wave, ray tracing, spectral efficiency.

In Spectrum-Sliced Elastic Optical Path Networks (SLICE), the lightpath bandwidth is variable and the virtual topology overlay on a physical topology shall be designed to optimize the spectrum utilization. Under static traffic, SLICE networks are typically designed through a Mixed Integer Linear Programming (MILP) with the aim of minimizing the spectrum utilization. In this paper, a new MILP formulation for protection in SLICE networks is proposed, which uses the concept of bandwidth squeezing and grooming to guarantee a minimum agreed bandwidth for each source-destination pair in the surviving bandwidth. The route for each demand on the physical topology is determined by balance equations together with physical layer constraints in the formulation, so that no pre-calculated routes are required and the modulation format of each established lightpath may be chosen with enough quality of transmission and save network spectrum. Therefore, the proposed formulation jointly solves the virtual topology design and physical topology design problems. The first results evaluate the effectiveness of the MILP formulation for two small networks when connections are under different Service Level Agreement (SLA) requirements and are provisioned by an appropriate protection scheme and different modulation formats. Due to the NP-hard nature of the proposed MILP formulation, a heuristic algorithm for moderately large networks is also proposed. Case studies are carried out in order to analyze the basic properties of the formulation and the performance of the proposed heuristic. With the proposed formulation, it is possible to identify the configurations that ensure minimum spectrum occupation with different kinds of protection for each lightpath. Different kinds of modulation formats are considered and contrasted to the benchmark case of a single modulation format and using the same kind of protection for all lightpaths.

This paper presents an analysis of the gated Gaussian impulsive noise and its effects on M-ary Quadrature Amplitude Modulation (M-QAM) schemes. In the approach, both amplitude variation and noisy pulse duration can be characterized as a modulation of the impulsive noise component by a discrete (binary or m-ary) random process. New exact expressions are presented for the probability density function, autocorrelation function and power spectral density of the noise, as well as for the bit error probability of M-QAM, considering the maximum a posteriori probability optimum receiver. An important aspect of the proposed approach is the fact that the discrete random process incorporates the main parameters of the impulsive noise, such as amplitude, duration, instants in which the noise is added and time intervals between instants in which the noise is added.

No abstract

No abstract

No abstract

Digital television is a multibillion-dollar industry with commercial systems now being deployed worldwide. In this concise yet detailed guide, you will learn about the standards that apply to fixed-line and mobile digital television, as well as the underlying principles involved. The digital television standards are presented to aid understanding of new systems in the market and reveal the variations between different systems used throughout the world. Discussions of source and channel coding then provide the essential knowledge needed for designing reliable new systems. Throughout the book the theory is supported by over 200 figures and tables, whilst an extensive glossary defines practical terminology. This is an ideal reference for practitioners in the field of digital television. It will also appeal to graduate students and researchers in electrical engineering and computer science, and can be used as a textbook for graduate courses on digital television systems.