Polymer optics have gained increasing importance in recent years. With advancing requirements for the optical components, the fabrication process remains a challenge. In particular, the fabrication of the mold inserts for the replication process is crucial for obtaining high-quality optical components. This review focuses on fabrication technologies for optical mold inserts. Thereby, two main types of technologies can be distinguished: fabrication methods to create mold inserts with optical surface quality and methods to create optical microstructures. Since optical mold inserts usually require outstanding form accuracies and surface qualities, a focus is placed on these factors. This review aims to give an overview of available methods as well as support the selection process when a fabrication technology is needed for a defined application. Furthermore, references are given to detailed descriptions of each technology if a deeper understanding of the processes is required.
Abstract:Polymer optics are widely used in various applications, replacing traditional glass lenses. The ability to create free-form and micro-structured optics, as well as fast replication, gives them major advantages over traditional glass lenses. However, the fabrication of complex optical components requires full process control and understanding of influencing factors on the quality of the polymer optical parts. In this work, a curved diffractive optical element (DOE) is fabricated using injection compression molding. Different gate designs were evaluated and the movement of the compression stamper was optimized to obtain good filling behavior. The process stability was analyzed and improved by controlling the melt temperature precisely. Finally, the molding parameters were optimized, focusing on the mold temperature, melt temperature and compression force. Curved diffractive optical elements were replicated with feature sizes of 1.6 µm. The experiments showed that all aspects of the molding process have to be controlled perfectly to produce complex polymer optics. High mold temperatures and compression force are necessary to replicate micro-structured features. The work presents a broad investigation and description of the fabrication process and their influences.
In this work, a polymer microlens array (MLA) for a hyperspectral imaging (HSI) system is produced by means of ultraprecision milling (UP-milling) and injection compression molding. Due to the large number of over 12,000 microlenses on less than 2 cm², the fabrication process is challenging and requires full process control. The study evaluates the process chain and optimizes the single process steps to achieve high quality polymer MLAs. Furthermore, design elements like mounting features are included to facilitate the integration into the final HSI system. The mold insert was produced using ultraprecision milling with a diamond cutting tool. The machining time was optimized to avoid temperature drifts and enable high accuracy. Therefore, single immersions of the diamond tool at a defined angle was used to fabricate each microlens. The MLAs were replicated using injection compression molding. For this process, an injection compression molding tool with moveable frame plate was designed and fabricated. The structured mold insert was used to generate the compression movement, resulting in a homogeneous pressure distribution. The characterization of the MLAs showed high form accuracy of the microlenses and the mounting features. The functionality of the molded optical part could be demonstrated in an HIS system by focusing light spectrums onto a CCD image sensor.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.