No abstract

No abstract

This paper deals with the experimental determination of the bond behaviour between ultra-high performance fiber-reinforced concrete (UHPFRC) and reinforcing bars (rebars). An experimental campaign has been carried out to assess the bond behaviour considering different rebar diameters, different embedment lengths and different concrete covers. A relationship between bond strength, compressive strength and rebar diameter has been drawn from the results of this campaign and results found in the literature. Thanks to an original instrumentation method using Fiber-Optic Sensor, the local constitutive law linking the local relative displacement between UHPFRC and rebar and the bond stress has been determined and compared with the law proposed by fib Model Code 2010.

No abstract

HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L'archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d'enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.

Distributed optical fiber systems (DOFSs) are an emerging and innovative technology that allows long-range and continuous strain/temperature monitoring with a high resolution. Sensing cables are either surface-mounted or embedded into civil engineering structures to ensure long-term structural monitoring and early crack detection. However, strain profiles measured in the optical fiber (OF) may differ from the actual strain in the structure due to the shear transfer through the intermediate material layers between the OF and the host material (i.e., in the protective coating of the sensing cable and in the adhesive). Therefore, OF sensors need to be qualified to provide accurate quantitative strain measurements. This study presents a methodology for the qualification of a DOFS. This qualification is achieved through the calculation of the so-called mechanical transfer function (MTF), which relates the strain profile in the OF to the actual strain profile in the structure. It is proposed to establish a numerical modeling of the system, in which the mechanical parameters are calibrated from experiments. A specific surface-mounted sensing cable connected to an optical frequency domain reflectometry interrogator is considered as a case study. It was found that (i) tensile and pull-out tests can provide detailed information about materials and interfaces of the numerical model; (ii) the calibrated model made it possible to compute strain profiles along the OF and therefore to calculate the MTF of the system; (iii) the results proved to be consistent with experimental data collected on a cracked concrete beam during a four-point bending test. This paper is organized as follows: first, the technical background related to DOFSs and interrogators is briefly recalled, the MTF is defined and the above-mentioned methodology is presented. In the second part, the methodology is applied to a specific cable. Finally, a comparison with experimental evidence validates the proposed approach.

The present study investigated the strain response of a distributed optical fiber sensor (DOFS) sealed in a groove at the surface of a concrete structure using a polymer adhesive and aimed to identify optimal conditions for crack monitoring. A finite element model (FEM) was first proposed to describe the strain transfer process between the host structure and the DOFS core, highlighting the influence of the adhesive stiffness. In a second part, mechanical tests were conducted on concrete specimens instrumented with DOFS bonded/sealed using several adhesives exhibiting a broad stiffness range. Distributed strain profiles were then collected with an interrogation unit based on Rayleigh backscattering. These experiments showed that strain measurements provided by DOFS were consistent with those from conventional sensors and confirmed that bonding DOFS to the concrete structure using soft adhesives allowed to mitigate the amplitude of local strain peaks induced by crack openings, which may prevent the sensor from early breakage. Finally, the FEM was generalized to describe the strain response of bonded DOFS in the presence of crack and an analytical expression relating DOFS peak strain to the crack opening was proposed, which is valid in the domain of elastic behavior of materials and interfaces.

No abstract