In this work, two embroidered textile moisture sensors are characterized with three different conductive yarns. The sensors are based on a capacitive interdigitated structure embroidered on a cotton substrate with an embroidered conductor yarn. The performance comparison of three different type of conductive yarns has been addressed. In order to evaluate the sensor sensitivity, the impedance of the sensor has been measured by means of an LCR meter from 20 Hz to 20 kHz on a climatic chamber with a sweep of the relative humidity from 30% to 65% at 20 °C. The experimental results show a clear and controllable dependence of the sensor impedance with the relative humidity and the chosen conductor yarns. This dependence points out the optimum conductive yarn to be used to develop wearable applications for moisture measurement.
In this paper, a smart office chair with movable textile sensors to monitor sitting position during the workday is presented. The system consists of a presence textile capacitive sensor with different levels of activation with a signal conditioning device. The proposed system was integrated into an office chair to detect postures that could provoke musculoskeletal disorders or discomfort. The microcontroller measured the capacitance by means of a cycle count method and provided the position information in real time. The information could be analysed to set up warnings to prevent incorrect postures or the necessity to move. Five participants assumed a series of postures, and the results showed the workability of the proposed smart chair. The chair can be provided as a new tool for companies, hospitals, or other institutions to detect incorrect postures and monitor the postures of people with reduced mobility. This tool can optimise control procedures or prevent occupational risks.
In this paper a wearable system with a sensor embroidered on a textile substrate to detect urine leaks is presented. The system consists of a moisture textile capacitive sensor together with the signal conditioning and its wireless transmission to the cloud. The proposed system has been integrated on underwear and hospital sheet to detect the urine leakage on the diaper users and critical ill patient, respectively. The methodology used by the microcontroller to measure the sensor value is a charge/discharge method. The information is visualised through a computer or smartphone, where can be seen the current state of the sensor. The system has a warning set up to communicate any urine leakage. The experimental results show the functionality of the proposed system which could supply a new tool to hospitals, nursing homes or other institutions to detect when the patient diaper or sheet need to be removed. This tool can optimise the hospital protocol and improve the patient quality of life.
In this work, an embroidered textile moisture sensor is proposed and characterized with three different fabric substrates. The sensors are based on a capacitive interdigitated structure embroidered on a textile substrate with a conductive yarn. The performance of three different type of substrates has been addressed. In order to evaluate the sensor behavior, the impedance of the sensor has been measured by means of an LCR meter from 20 Hz to 200 kHz on a climatic chamber with a sweep of the relative humidity from 30% to 80% at 20ºC. The results show that the fabric substrate defines the electrical properties of the sensor due to both, the substrate permittivity and size yarn thickness increase. This sensor dependence determines the optimum substrate to be used to develop wearable applications for moisture measurement.
In this paper, a full textile capacitive woven sensor integrated over a textile substrate is presented. The sensor consists in an interdigitated capacitance prepared to measure moisture and/or presence detection. In order to evaluate the sensor response to moisture, capacitance has been measured by means of an LCR meter from 20 Hz to 20 kHz in a climatic chamber with a swept of the relative humidity (RH) from 30% to 90% at 20 °C. Subsequently, presence response is evaluated measuring the capacitance of the woven sensor meanwhile a person is sitting down and getting up. The woven sensor results demonstrate its functionality over moisture measurement where sensor capacitance changes from a minimum of 9.74 pF at 30% RH to a maximum of 2.31 uF at 90% RH. The presence detection is also demonstrated, which makes the capacitance variation change from a 10% of capacitance variation when the chair is empty, to a capacitance variation of 170% when a person is sitting on it. The adaptation of the weaving process to accomplish a fully integrated sensor provides a better repeatability than previous embroidered sensors and opens a door to being commercially produced.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.