Nature uses organic molecules for light harvesting and photosynthesis but most man-made water splitting catalysts are inorganic semiconductors. Organic photocatalysts, while attractive because of their synthetic tunability, tend to have low quantum efficiencies for water splitting. Here we present a crystalline covalent organic framework (COF) based on a benzobis(benzothiophene sulfone) moiety that shows a much higher activity for photochemical hydrogen evolution than its amorphous or semi-crystalline counterparts. The COF is stable under long-term visible irradiation and shows steady photochemical hydrogen evolution with a sacrificial electron donor for at least fifty hours. We attribute its high quantum efficiency of FS-COF to its crystallinity, its strong visible light absorption, and its wettable, hydrophilic 3.2 nm mesopores. These pores allow the framework to be dye sensitized, leading to a further 61% enhancement in the hydrogen evolution rate up to 16.3 mmol g-1 h-1. The COF also retained its photocatalytic activity when cast as a thin film onto a support. Photocatalytic solar hydrogen production-or water splitting-offers an abundant clean energy source for the future. The use of dispersed, powdered photocatalysts or thin catalyst films is attractively simple, but so far, no catalyst satisfies the combined requirements of cost, stability and solar-to-hydrogen efficiency. Since the first report of TiO2 as a photocatalyst, 1 many inorganic semiconductors have been explored for water splitting, both in photoelectrochemical cells and as photocatalyst suspensions. 2-4 Recently, organic semiconductors have emerged as promising materials for photocatalytic hydrogen and oxygen evolution. 5-7 Poly(p-phenylene) was first reported as a photocatalyst for hydrogen evolution in 1985, 8,9 but its activity was poor and limited to the ultraviolet spectrum. Since then, more active organic materials have been reported as visible light photocatalysts for hydrogen production using sacrificial donors. This started with carbon nitrides 5,10 followed by poly(azomethine)s, 11 conjugated microporous polymers (CMPs), 6,12,13 linear conjugated polymers, 12,14-16 and covalent triazine-based frameworks (CTFs). 17-19 Carbon nitrides were further developed into hybrid systems that facilitate overall water splitting to produce both hydrogen and oxygen, for example by including metal co-catalysts. 20 CMPs were also claimed to exhibit overall photocatalytic water splitting. 21 However, while it is possible to tune semiconductor properties such as band gap by modular copolymerization strategies, 6 organic materials such as carbon nitrides, conjugated polymers and CTFs lack long-range order: they are amorphous or semi-crystalline. 17,22 This lack of order might limit the transport of photoactive charges to the catalyst surface. 23 More generally, it is challenging to construct atomistic structure-property relationships for materials where the three-dimensional architecture is poorly defined. Covalent organic frameworks (COFs) 24-26 are a cla...

The separation of molecules with similar size and shape is an important technological challenge. For example, rare gases can pose either an economic opportunity or an environmental hazard and there is a need to separate these spherical molecules selectively at low concentrations in air. Likewise, chiral molecules are important building blocks for pharmaceuticals, but chiral enantiomers, by definition, have identical size and shape, and their separation can be challenging. Here we show that a porous organic cage molecule has unprecedented performance in the solid state for the separation of rare gases, such as krypton and xenon. The selectivity arises from a precise size match between the rare gas and the organic cage cavity, as predicted by molecular simulations. Breakthrough experiments demonstrate real practical potential for the separation of krypton, xenon and radon from air at concentrations of only a few parts per million. We also demonstrate selective binding of chiral organic molecules such as 1-phenylethanol, suggesting applications in enantioselective separation.

Molecular crystals cannot be designed like macroscopic objects because they do not assemble according to simple, intuitive rules. Their structure results from the balance of many weak interactions, unlike the strong and predictable bonding patterns found in metal–organic frameworks and covalent organic frameworks. Hence, design strategies that assume a topology or other structural blueprint will often fail. Here, we combine computational crystal structure prediction and property prediction to build energy–structure–function maps describing the possible structures and properties available to a candidate molecule. Using these maps, we identify a highly porous solid with the lowest density reported for a molecular crystal. Both crystal structure and physical properties, such as the methane storage capacity and guest selectivity, are predicted using the molecular diagram as the only input. More generally, energy–structure–function maps could be used to guide the experimental discovery of materials with any target function that can be calculated from predicted crystal structures, such as electronic structure or mechanical properties.

The separation of hydrogen isotopes for applications such as nuclear fusion is a major challenge. Current technologies are energy intensive and inefficient. Nanoporous materials have the potential to separate hydrogen isotopes by kinetic quantum sieving, but high separation selectivity tends to correlate with low adsorption capacity, which can prohibit process scale-up. In this study, we use organic synthesis to modify the internal cavities of cage molecules to produce hybrid materials that are excellent quantum sieves. By combining small-pore and large-pore cages together in a single solid, we produce a material with optimal separation performance that combines an excellent deuterium/hydrogen selectivity (8.0) with a high deuterium uptake (4.7 millimoles per gram).

Supramolecular synthesis is a powerful strategy for assembling complex molecules, but to do this by targeted design is challenging. This is because multicomponent assembly reactions have the potential to form a wide variety of products. High-throughput screening can explore a broad synthetic space, but this is inefficient and inelegant when applied blindly. Here we fuse computation with robotic synthesis to create a hybrid discovery workflow for discovering new organic cage molecules, and by extension, other supramolecular systems. A total of 78 precursor combinations were investigated by computation and experiment, leading to 33 cages that were formed cleanly in one-pot syntheses. Comparison of calculations with experimental outcomes across this broad library shows that computation has the power to focus experiments, for example by identifying linkers that are less likely to be reliable for cage formation. Screening also led to the unplanned discovery of a new cage topology—doubly bridged, triply interlocked cage catenanes.

The energy-efficient separation of alkylaromatic compounds is a major industrial sustainability challenge. The use of selectively porous extended frameworks, such as zeolites or metal–organic frameworks, is one solution to this problem. Here, we studied a flexible molecular material, perethylated pillar[n]arene crystals (n = 5, 6), which can be used to separate C8 alkylaromatic compounds. Pillar[6]arene is shown to separate para-xylene from its structural isomers, meta-xylene and ortho-xylene, with 90% specificity in the solid state. Selectivity is an intrinsic property of the pillar[6]arene host, with the flexible pillar[6]arene cavities adapting during adsorption thus enabling preferential adsorption of para-xylene in the solid state. The flexibility of pillar[6]arene as a solid sorbent is rationalized using molecular conformer searches and crystal structure prediction (CSP) combined with comprehensive characterization by X-ray diffraction and 13C solid-state NMR spectroscopy. The CSP study, which takes into account the structural variability of pillar[6]arene, breaks new ground in its own right and showcases the feasibility of applying CSP methods to understand and ultimately to predict the behavior of soft, adaptive molecular crystals.

Imine cage molecules can be reduced to amines to improve their chemical stability, but this introduces molecular flexibility. Hence, amine cages tend not to exhibit permanent solid-state porosity. We report a synthetic strategy to achieve shape persistence in amine cages by tying the cage vertices with carbonyls such as formaldehyde. Shape persistence is predicted by conformer stability calculations, providing a design basis for the strategy. The tied cages show enhanced porosity and unprecedented chemical stability toward acidic and basic conditions (pH 1.7-12.3), where many other porous crystalline solids would fail.

The influence of ligands on the spin state of a metal ion is of central importance for bioinorganic chemistry, and the production of base‐metal catalysts for synthesis applications. Complexes derived from [Fe(bpp)2]2+ (bpp=2,6‐di{pyrazol‐1‐yl}pyridine) can be high‐spin, low‐spin, or spin‐crossover (SCO) active depending on the ligand substituents. Plots of the SCO midpoint temperature (T 1/2 ) in solution vs. the relevant Hammett parameter show that the low‐spin state of the complex is stabilized by electron‐withdrawing pyridyl (“X”) substituents, but also by electron‐donating pyrazolyl (“Y”) substituents. Moreover, when a subset of complexes with halogeno X or Y substituents is considered, the two sets of compounds instead show identical trends of a small reduction in T 1/2 for increasing substituent electronegativity. DFT calculations reproduce these disparate trends, which arise from competing influences of pyridyl and pyrazolyl ligand substituents on Fe‐L σ and π bonding.