Fixed and reduced: Dicobalt complexes of a Schiff base calixpyrrole ligand adopt rigid, wedged “pacman” structures that can accommodate oxygen (see picture) and reduce it within the bimetallic molecular cleft.

The syntheses, characterisation and complexation reactions of a series of binucleating Schiff-base calixpyrrole macrocycles are described. The acid-templated [2+2] condensations between meso-disubstituted diformyldipyrromethanes and o-phenylenediamines generate the Schiff-base pyrrolic macrocycles H(4)L(1) to H(4)L(6) upon basic workup. The single-crystal X-ray structures of both H(4)L(3).2 EtOH and H(4)L(6).H2O confirm that [2+2] cyclisation has occurred, with either EtOH or H2O hydrogen-bonded within the macrocyclic cleft. A series of complexation reactions generate the dipalladium [Pd2(L)] (L=L(1) to L(5)), dinickel [Ni2(L(1))] and dicopper [Cu2(L)] (L=L(1) to L(3)) complexes. All of these complexes have been structurally characterised in the solid state and are found to adopt wedged structures that are enforced by the rigidity of the aryl backbone to give a cleft reminiscent of the structures of Pacman porphyrins. The binuclear nickel complexes [Ni2(mu-OMe)2Cl2(HOMe)2(H(4)L(1))] and [Ni2(mu-OH)2Cl2(HOMe)(H(4)L(5))] have also been prepared, although in these cases the solid-state structures show that the macrocyclic ligand remains protonated at the pyrrolic nitrogen atoms, and the Ni(II) cations are therefore co-ordinated by the imine nitrogen atoms only to give an open conformation for the complex. The dicopper complex [Cu2(L(3))] was crystallised in the presence of pyridine to form the adduct [Cu2(py)(L(3))], in which, in the solid state, the pyridine ligand is bound within the binuclear molecular cleft. Reaction between H(4)L(1) and [Mn(thf){N(SiMe(3))2}2] results in clean formation of the dimanganese complex [Mn2(L(1))], which, upon crystallisation, formed the mixed-valent complex [Mn2(mu-OH)(L(1))] in which the hydroxo ligand bridges the metal centres within the molecular cleft.

Heating of 6-methylpyridazine-3-thione (HPn(Me)) and 6-tert-butylpyridazine-3-thione (HPn(tBu)) with potassium borohydride in diphenylmethane in a 3:1 ratio gave two new scorpionate ligands K[HB(Pn(Me))(3)] and K[HB(Pn(tBu))(3)]. Single crystal X-ray diffraction analysis of the methyl derivative K[HB(Pn(Me))(3)] revealed a dimeric species with one potassium atom coordinated by six sulfur atoms of two scorpionate ligands and a second potassium atom coordinated by three nitrogen atoms of one of the two ligands as well as by three water molecules. The reaction of K[HB(Pn(tBu))(3)] with nickel(II) chloride or cobalt(II) chloride in CH(2)Cl(2) led to the new boratrane compounds [M{B(Pn(tBu))(3)}Cl] (M = Ni 1, Co 3) where a formal reduction of the metal ions to Ni(I) and Co(I), respectively, and activation of the B-H bond occurred. Similar reactivity was observed by employing K[HB(Pn(R))(3)] (R = Me, tBu) and nickel(II) chloride in water. Reaction with cobalt(II) chloride in water also gave boratrane compounds [Co{B(Pn(R))(3)}(Pn(R))] (R = tBu 4, Ph 5), but instead of a chloride a bidentate pyridazinethionate ligand from a defragmentated scorpionate is found in the molecules. The molecular structures of all nickel and cobalt compounds were determined by single crystal X-ray diffraction analyses confirming the formation of boratranes in compounds 1-5. Magnetic measurements confirm the reduced oxidation states and the paramagnetic character of the Ni(I) and Co(I) complexes. Supportive DFT studies were carried out for a better understanding of the electronic nature of the metal-boron bond of the boratrane complexes.

Reaction of potassium tris(mercapto-tert-butylpyridazinyl)borate K[Tn(tBu)] with copper(II) chloride in dichloromethane at room temperature led to the diamagnetic copper boratrane compound [Cu{B(Pn(tBu))(3)}Cl] (Pn = pyridazine-3-thionyl) (1) under activation of the B-H bond and formation of a Cu-B dative bond. In contrast to this, stirring of the same ligand with copper(I) chloride in tetrahydrofuran (THF) gave the dimeric compound [Cu{Tn(tBu)}](2) (2) where one copper atom is coordinated by two sulfur atoms and one hydrogen atom of one ligand and one sulfur of the other ligand. Hereby, no activation of the B-H bond occurred but a 3-center-2-electron B-H···Cu bond is formed. The reaction of copper(II) chloride with K[Tn(tBu)] in water gave the same product 2, but a formal reduction of the metal center from Cu(II) to Cu(I) occurred. When adding tricyclohexyl phosphine to the reaction mixture of K[Tn(R)] (R = tBu, Me) and copper(I) chloride in MeOH, the distorted tetrahedral Cu complexes [Cu{Tn(R)}(PCy(3))] (R = tBu 3, Me 4) were formed. Compound 4 is exhibiting an "inverted" κ(3)-H,S,S, coordination mode. The copper boratrane 1 was further investigated by density functional theory (DFT) calculations for a better understanding of the M→B interaction involving the d(8) electron configuration of Cu.

A series of octahedral dioxomolybdenum(VI) complexes of the type [MoO(2)L(2)] {L = 4-Ar-pent-2-en-ol; L(i-Pr2Ph) with Ar = 2,6-diisopropylphenyl (1); L(Me2Ph) with Ar = 2,6-dimethylphenyl (2), L(MePh) with Ar = 2-methylphenyl (3) and with Ar = phenyl (4)} and dioxotungsten(VI) compounds [WO(2)L(2)] {L(i-Pr2Ph) (5); L(Me2Ph) (6) and L(MePh) (7)} with Schiff bases have been synthesized as models for oxotransferases. Spectroscopic characterization in solution shows with the sterically encumbered ligands L(i-Pr2)Ph and L(Me2)Ph isomerically pure products whereas the ligand with only one substituent in ortho position at the aromatic ring L(MePh) revealed a dynamic mixture of three isomers as confirmed by variable temperature NMR spectroscopy. Single crystal X-ray diffraction analyses of compounds 1, 2, and 4 and showed them to be in the N,N-trans conformation consistent with the larger steric demand at nitrogen. Oxygen atom transfer (OAT) properties towards trimethylphosphine were investigated leading to the isolation of two mononuclear molybdenum(IV) compounds [MoO(PMe(3))(L(Me2Ph))(2)] (8) and [MoO(PMe(3))(L(MePh))(2)] (9) as confirmed by spectroscopic and crystallographic means. The kinetics of OAT between complex [MoO(2)(L(Me2Ph))(2)] (2) and PMe(3) was investigated by UV/Vis spectroscopy under pseudo-first-order conditions revealing single-step reactions with Eyring values of DeltaH(double dagger) = +60.79 kJ mol(-1) and DeltaS(double dagger) = -112 J mol(-1) K(-1) and a first-order dependence of phosphine consistent with a slow nucleophilic attack of the phosphine showing the octahedral geometries of this system to be unfavorable for OAT. Compound 1 showed no OAT reactivity towards PMe(3) emphasizing the influence of sterical properties. Furthermore, the reactivity of the reduced compounds [MoO(PMe(3))(L(Me2Ph))(2)] (8) and [MoO(PMe(3))(L(MePh))(2)] (9) towards molecular oxygen was investigated leading, in the case of 8, to the substitution of PMe(3) by O(2) under formation of the peroxo compound [MoO(O(2))(L(Me2Ph))(2)] (10). In contrast, the analogous reaction employing 9 led to oxidation forming the dioxo compound [MoO(2)(L(MePh))(2)] (3).

The syntheses and characterization of a series of binuclear cobalt complexes of the octadentate Schiff-base calixpyrrole ligand L are described. The cobalt(II) complex [Co(2)(L)] was prepared by a transamination method and was found to adopt a wedged, Pac-man geometry in the solid state and in solution. Exposure of this compound to dioxygen resulted in the formation of a 90:10 mixture of the peroxo [Co(2)(O(2))(L)] and superoxo [Co(2)(O(2))(L)](+) complexes in which the peroxo ligand was found to bind in a Pauling mode in the binuclear cleft in pyridine and acetonitrile adducts in the solid state. The dioxygen compounds can also be prepared directly from Co(OAc)(2) and H(4)L under aerobic conditions in the presence of a base. The reduction of dioxygen catalyzed by this mixture of compounds was investigated using cyclic voltammetry and rotating ring disk electrochemistry and, in acidified ferrocene solutions, using UV-vis spectrophotometry, and although no formation of peroxide was seen, reaction rates were slow and had limited turnover. The deactivation of the catalyst material is thought to be due to a combination of the formation of stable hydroxy-bridged binuclear complexes, for example, [Co(2)(OH)(L)](+), an example of which was characterized structurally, and the catalytic resting point, the superoxo cation, is formed by a pathway independent of the major peroxo product. Collision-induced dissociation mass spectrometry experiments showed that, while [Co(2)(O(2))(L)]H(+) ions readily lose a single O atom, the resulting Co-O(H)-Co core remains resistant to further fragmentation. Furthermore, DFT calculations show that the O-O bond distance in the dioxygen complexes is not a good indicator of the degree of reduction of the O(2) unit and provide a reduction potential of ca. +0.40 V versus the normal hydrogen electrode for the [Co(2)(O(2))(L)](+/0) couple in dichloromethane solution.

Reaction of [MoO(2)(η(2)-tBu(2)pz)(2)] with Schiff base ligands HL(X) (X = 1-5) gave molybdenum(VI) dioxo complexes of the type cis-[MoO(2)(L(X))(2)] as yellow to light brown solids in moderate to good yields. All ligands coordinate via its phenolic O atom and the imine N atom in a bidentate manner to the metal center. The third donor atom (R(2) = OMe or NMe(2)) in the side chain in complexes 1-4 is not involved in coordination and remains pendant. This was confirmed by X-ray diffraction analyses of complexes 1 and 3. Complexes 1, 3, and 5 exist as a mixture of two isomers in solution, whereas complexes 2 and 4 with sterically less demanding substituents on the aromatics only show one isomer in solution. All complexes are active catalysts in the epoxidation of various internal and terminal alkenes, and epoxides in moderate to good yields with high selectivities are obtained. In the challenging epoxidation of styrene, complexes 1 and 2 prove to be very active and selective. The selectivity seems to be influenced by the pendant donor arm, as complex 5 without additional donor in the side chain is less selective. Experiments prove that the addition of n-butyl methyl ether as intermolecular donor per se has no influence on the selectivity. The basic conditions induced by the NMe(2) groups in complexes 3 and 4 lead to lower activity.

The asymmetric molybdenum(VI) dioxo complexes of the bis(phenolate) ligands 1,4-bis(2-hydroxybenzyl)-1,4-diazepane, 1,4-bis(2-hydroxy-4-methylbenzyl)-1,4-diazepane, 1,4-bis(2-hydroxy-3,5-dimethylbenzyl)-1,4-diazepane, 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)-1,4-diazepane, 1,4-bis(2-hydroxy-4-flurobenzyl)-1,4-diazepane, and 1,4-bis(2-hydroxy-4-chlorobenzyl)-1,4-diazepane (H(2)(L1)-H(2)(L6), respectively) have been isolated and studied as functional models for molybdenum oxotransferase enzymes. These complexes have been characterized as asymmetric complexes of type [MoO(2)(L)] 1-6 by using NMR spectroscopy, mass spectrometry, elemental analysis, and electrochemical methods. The molecular structures of [MoO(2)(L)] 1-4 have been successfully determined by single-crystal X-ray diffraction analyses, which show them to exhibit a distorted octahedral coordination geometry around molybdenum(VI) in an asymmetrical cis-β configuration. The Mo-O(oxo) bond lengths differ only by ≈0.01 Å. Complexes 1, 2, 5, and 6 exhibit two successive Mo(VI)/Mo(V) (E(1/2), -1.141 to -1.848 V) and Mo(V)/Mo(IV) (E(1/2), -1.531 to -2.114 V) redox processes. However, only the Mo(VI)/Mo(V) redox couple was observed for 3 and 4, suggesting that the subsequent reduction of the molybdenum(V) species is difficult. Complexes 1, 2, 5, and 6 elicit efficient catalytic oxygen-atom transfer (OAT) from dimethylsulfoxide (DMSO) to PMe(3) at 65 °C at a significantly faster rate than the symmetric molybdenum(VI) complexes of the analogous linear bis(phenolate) ligands known so far to exhibit OAT reactions at a higher temperature (130 °C). However, complexes 3 and 4 fail to perform the OAT reaction from DMSO to PMe(3) at 65 °C. DFT/B3LYP calculations on the OAT mechanism reveal a strong trans effect.