Panels were made from Arundo donax L. particles bonded with different non-modified starches as adhesive without chemical additives by hotpressing at a low temperature (110 ºC) and pressure (2.6 N/mm 2 ). The experimental panels were tested for their physical and mechanical properties according to the procedures defined by the European Union (EN) Standard. The microstructure of samples was observed by scanning electron microscopy (SEM). Panels manufactured with potato starch had the highest modulus of rupture and modulus of elasticity, meeting the standard for load bearing (grade P4 for indoor use in dry ambient) (EN 312: 2003). Panels made with corn starch and wheat flour, at a 10% level and three pressing cycles met the standard for general uses (grade P1). Panel bonded with rye bran flour achieved the best internal bond strentgh. The water resistance was poor and needs to be improved.

No abstract

No abstract

A large amount of research is being carried out to increase the use of renewable and eco-friendly resources like plant fibres for manufacturing new products in order to reduce energy consumption and improve their environmental impact. The almond is a deciduous tree that is native to Mediterranean areas, although nowadays the United States is the world’s main almond producer. The almond fruit has three distinct parts: the inner core or flesh, the hard middle part or shell, and the outer covering of the shell, called the hull (exocarp and mesocarp). This work analyses the use of almond residues for producing eco-friendly particleboards. The ground hull of the almond has been used as a raw material, obtaining 4 different particle sizes. Eight type of board has been manufactured without using any kind of adhesive. The particle size influences some physical and mechanical properties. With particle sizes <0.25 mm it is possible to achieve greater strength in terms of modulus of rupture (MOR): 14.01 N/mm2, modulus of elasticity (MOE): 2295.32 N/mm2 and internal bonding strength (IB): 0.57 N/mm2. This study shows that it is technically possible to manufacture boards with this material without using adhesives.

Palm trees are very fast-growing species. Their management produces annually a large amount of biomass that traditionally has been either disposed of at dumping sites or has been burnt onsite. This paper presents an experimental study to obtain particleboard using this biomass in a low energy process (short pressing time and low pressing temperature), using particles of different sizes from the rachis (midrib) of the three palm species most representative of urban gardening in Spain: canary palm (Phoenix canariensis hort. ex Chabaud), date palm (Phoenix dactylifera L.) and washingtonia palm (Washingtonia robusta H. Wendl). Their physical and mechanical properties were tested, and the feasibility of their use as a construction material was evaluated. The results showed that the manufactured particleboard had similar performance to conventional wood particleboard and good thermal insulation properties. Boards made with the canary species showed better mechanical performance. The properties of the particleboard depended on the particle size and species. The use of the pruning waste of palm trees to produce durable materials such as particleboard could be beneficial to the environment since it is a method of carbon fixation, helping to decrease atmospheric pollution and reducing the amount of waste that ends in dumping sites.