A Navier-Stokes solver based on artificial compressibility and pseudo-time stepping, coupled with the energy equation, is used to model the thermodynamic effects of cavitation in cryogenic fluids. The analysis is restricted to partial sheet cavitation in two-dimensional cascades. Thermodynamic effects of cavitation assume significance in cryogenic fluids because these fluids are generally operated close to the critical point and also because of the strong dependence of the vapor pressure on the temperature. The numerical approach used is direct and fully nonlinear, that is, the cavity profile evolves as part of the solution for a specified cavitation pressure. This precludes the necessity of specifying the cavity length or the location of the inception point. Numerical solutions are presented for two-dimensional flow problems and validated with experimental measurements. Predicted temperature depressions are also compared with measurements for liquid hydrogen and nitrogen. The cavitation procedure presented is easy to implement in engineering codes to provide satisfactory predictions of cavitation. The flexibility of the formulation also allows extension to more complex flows and/or geometries.
An Euler solver based on artificial-compressibility and pseudo-time stepping is developed for the analysis of partial sheet cavitation in two-dimensional cascades and on isolated airfoils. The computational domain is adapted to the evolution of the cavity surface and the boundary conditions are implemented on the cavity interface. This approach enables the cavitation pressure condition to be incorporated directly without requiring the specification of the cavity length or the location of the inception point. Numerical solutions are presented for a number of two-dimensional cavity flow problems, including both leading edge cavitation and the more difficult mid-chord cavitation condition. Validation is accomplished by comparing with experimental measurements and nonlinear panel solutions from potential flow theory. The demonstrated success of the Euler cavitation procedure implies that it can be incorporated in existing incompressible CFD codes to provide engineering predictions of cavitation. In addition, the flexibility of the Euler formulation may allow extension to more complex problems such as viscous flows, time-dependent flows and three-dimensional flows.
(a) P m (b) Fig. 1 This paper presents current research in analysis of passive microfluidic capillary burst valves. A capillary burst valve stops the liquid flow using a capillary pressure barrier that develops when the channel cross section expands abruptly. Valves of this type provide the capability of precise control on sample location in microfluidic device. Detailed numerical analyses of the valve behaviour is presented and compared with experimental measurements. A model for the valve is then extracted that characterizes the valve performance for various common cross sections.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.