No abstract

No abstract

No abstract

Abstract. The calibration of SCIAMACHY was thoroughly checked since the instrument was launched on-board EN-VISAT in February 2002. While SCIAMACHY's functional performance is excellent since launch, a number of technical difficulties have appeared, that required adjustments to the calibration. The problems can be separated into three types: (1) Those caused by the instrument and/or platform environment. Among these are the high water content in the satellite structure and/or MLI layer. This results in the deposition of ice on the detectors in channels 7 and 8 which seriously affects the retrievals in the IR, mostly because of the continuous change of the slit function caused by scattering of the light through the ice layer. Additionally a light leak in channel 7 severely hampers any retrieval from this channel. (2) Problems due to errors in the on-ground calibration and/or data processing affecting for example the radiometric calibration. A new approach based on a mixture of onground and in-flight data is shortly described here. (3) Problems caused by principal limitations of the calibration concept, e.g. the possible appearance of spectral structures after the polarisation correction due to unavoidable errors in the determination of atmospheric polarisation. In this paper we give a complete overview of the calibration and problems that still have to be solved. We will also give an indication of the Correspondence to: G. Lichtenberg (guenter.lichtenberg@dlr.de) effect of calibration problems on retrievals where possible. Since the operational processing chain is currently being updated and no newly processed data are available at this point in time, for some calibration issues only a rough estimate of the effect on Level 2 products can be given. However, it is the intention of this paper to serve as a future reference for detailed studies into specific calibration issues.

Vertical profiles of O 3 and NO 2 abundances from the atmospheric instruments GOMOS (Global Ozone Monitoring by the Occultation of Stars), MIPAS (Michelson Interferometer for Passive Atmospheric Sounding) and SCIAMACHY (Scanning Imaging Spectrometer for Atmospheric Chartography) all on-board the recently launched European Space Agency (ESA) Environmental Satellite (ENVISAT) are intercompared. These comparisons contribute to the validation of these data products by detecting systematic deviations, for example, wrong tangent height determinations, spectroscopic errors, and others. The cross comparison includes GOMOS data products retrieved by the GOMOS prototype processor from ACRI (Sophia Antipolis, France), the scientific SCIAMACHY data products from the Institute of Environmental Physics at University of Bremen (IUP) and the scientific MIPAS data products from the Institute for Meteorology and Climate Research in Karlsruhe (IMK) and Institute of Astrophysics in Andalusia (IAA). Coincident measurements were identified by limiting the time difference to 100 min (duration of one orbit) and less than 500 km between two observation points. When lower stratospheric ozone is strongly depleted during polar spring, a homogeneity condition was further imposed on the satellite measurements by requiring an upper limit on the potential vorticity difference at the 475 K isentrope between both observations. Since geographically coincident NO 2 measurements of the three instruments are performed during different times of the day and NO 2 has a rather strong diurnal variability, matches of NO 2 profiles were compared only where the solar zenith angle difference was below 5°. First results of the cross comparison show an agreement within 15% between 21 and 40 km altitude for O 3 profiles and an agreement within 20% between 27 and 40 km altitude for NO 2 profiles among the GOMOS, MIPAS and SCIAMACHY measurements.