Passive flow control techniques, and particularly vortex generators have been used successfully in a broad range of aero-and hydrodynamics applications to alter the characteristics of boundary layer separation. This study aims to review how such techniques can mitigate the extent and impact of cavitation in incompressible flows. This review focuses first on vortex generators to characterize key physical principles. It then considers the complete range of passive flow control technologies, including surface conditioning and roughness, geometry modification, grooves, discharge, injection, obstacles, vortex generators, and bubble generators. The passive flow control techniques reviewed typically delay and suppress boundary layer separation by decreasing the pressure gradient at the separation point. The literature also identifies streamwise vortices that result in the transfer of momentum from the free stream to near-wall low energy flow regions. The area of interest concerns hydraulic machinery, whose performance and life span are particularly susceptible to cavitation. The impact on performance includes a reduction in efficiency and fluctuations in discharge pressure and flow, while cavitation can greatly increase wear of bearings, wearing rings, seals, and impeller surfaces due to excessive vibration and surface erosion. In that context, few studies have also shown the positive effects that passive controls can have on the hydraulic performance of centrifugal pumps, such as total head and efficiency. It is conceivable that a new generation of design in hydraulic systems may be possible if simple design features can be conceived to maximize power transfer and minimize losses and cavitation. There are still, however, significant research gaps in understanding a range of impact factors such as manufacturing processes, lifetime, and durability, and essentially how a static design can be optimized to deliver improved performance over a realistic range of operating conditions.
Purpose This paper aims to provide an experimental/numerical analysis of free convection within a hollow/finned cavity. Design/methodology/approach The hollow square cavity is equipped with eight active fins which have a similar configuration and different temperatures. Furthermore, four different thermal arrangements are considered to determine the order of temperature for each fin. The coupled lattice Boltzmann method is used, which not only maintains the considerable advantages of standard lattice Boltzmann method such as accuracy but also enhances the stability of this method. Findings The cavity is filled with TiO2-SiO2/Water-Ethylene Glycol nanofluid. The thermal conductivity and dynamic viscosity of nanofluid are experimentally measured using high-precision devices in six concentrations of the nanoparticle. In this study, some main parameters, including a range of Rayleigh number (103 < Ra < 106), the concentration of nanofluid (0.5 to 3 Vol.%) and thermal arrangements of fins, are considered. The effects of these main parameters on the flow, isotherms, heat transfer performance and entropy generation are studied. Originality/value The originality of this paper is combining the numerical simulation (lattice Boltzmann method) using a modern approach with experimental observations of nanofluid’s properties.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.