The surging interest in high performance, low‐cost, and safe energy storage devices has spurred tremendous research efforts in the development of advanced electrode active materials. Herein, the in situ growth of zinc–iron layered double hydroxide (Zn–Fe LDH) on graphene aerogel (GA) substrates through a facile, one‐pot hydrothermal method is reported. The strong interaction and efficient electronic coupling between LDH and graphene substantially improve interfacial charge transport properties of the resulting nanocomposite and provide more available redox active sites for faradaic reactions. An LDH–GA||Ni(OH)2 device is also fabricated that results in greatly enhanced specific capacity (187 mAh g−1 at 0.1 A g−1), outstanding specific energy (147 Wh kg−1), excellent specific power (16.7 kW kg−1), along with 88% capacity retention after >10 000 cycles. This approach is further extended to Ni–MH and Ni–Cd batteries to demonstrate the feasibility of compositing with graphene for boosting the energy storage performance of other well‐known Ni‐based batteries. In contrast to conventional Ni‐based batteries, the nearly flat voltage plateau followed by a sloping potential profile of the integrated supercapacitor–battery enables it to be discharged down to 0 V without being damaged. These findings provide new prospects for the design of high‐performance and affordable superbatteries based on earth‐abundant elements.
Transition-metal chalcogenides have emerged as a promising class of materials for energy storage applications due to their earth abundance, high theoretical capacity, and high electrical conductivity. Herein, we introduce a facile and one-pot electrodeposition method to prepare high-performance nickel selenide Ni x Se y (0.5 ≤ x/y ≤ 1.5) nanostructures (specific capacity = 180.3 mA h g–1 at 1 A g–1). The as-synthesized nickel selenide (NS) nanostructure is however converted to other polymorphs of nickel selenide including orthorhombic NiSe2, trigonal Ni3Se2, hexagonal NiSe, and orthorhombic Ni6Se5 over cycling. Interestingly, NiSe2 and Ni3Se2 polymorphs that display a more metallic character and superior energy storage performance are the predominant phases after a few hundred cycles. We fabricated a hybrid device using activated carbon (AC) as a supercapacitor-type negative electrode and NS as a high-rate battery-type positive electrode (AC||NS). This hybrid device provides a high specific energy of 71 W h kg–1, an excellent specific power of up to 31 400 W kg–1, and exceptional cycling stability (80% retention of the initial capacity after 20 000 cycles). The higher energy storage performance of the device is a result of the development of high-performance NiSe2 and Ni3Se2 polymorphs. Moreover, the reduction of the critical dimension of the NS particles to the nanoscale partially induces an extrinsic pseudocapacitive behavior that improves the rate capability and durability of the device. We also explored the origin of the superior energy storage performance of the NS polymorphs using density functional theory calculations in terms of the computed density of states around the Fermi level, electrical conductivity, and quantum capacitance that follows the trend NiSe2 > Ni3Se2 > NiSe > Ni6Se5. The present study thus provides an appealing approach for tailoring the phase composition of NS as an alternative to the commonly used templated synthesis methods.
The development of transition metal‐based non‐precious‐metal electrocatalysts for energy storage and conversion systems has received a lot of interest recently. To further this subject in the proper way given the development of electrocatalysts, a fair comparison of their respective performance is necessary. This Review investigates the parameters used for the comparison of electrocatalyst activity. Significant evaluation criteria employed in electrochemical water splitting studies are the overpotential at defined current density usually at 10 mA per geometric surface area, Tafel slope, exchange current density, mass activity, specific activity and turnover frequency (TOF). This Review will discuss how to identify the specific activity and TOF by electrochemical and non‐electrochemical methods to represent intrinsic activity as well as the benefits and uncertainties of each technique, ensuring that each method is applied correctly when calculating intrinsic activity metrics.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.