Solution-processed organic photovoltaics (OPV) offer the attractive prospect of low-cost, light-weight and environmentally benign solar energy production. The highest efficiency OPV at present use low-bandgap donor polymers, many of which suffer from problems with stability and synthetic scalability. They also rely on fullerene-based acceptors, which themselves have issues with cost, stability and limited spectral absorption. Here we present a new non-fullerene acceptor that has been specifically designed to give improved performance alongside the wide bandgap donor poly(3-hexylthiophene), a polymer with significantly better prospects for commercial OPV due to its relative scalability and stability. Thanks to the well-matched optoelectronic and morphological properties of these materials, efficiencies of 6.4% are achieved which is the highest reported for fullerene-free P3HT devices. In addition, dramatically improved air stability is demonstrated relative to other high-efficiency OPV, showing the excellent potential of this new material combination for future technological applications.

Advancing non-fullerene acceptor (NFA) organic photovoltaics requires the mitigation of the efficiency-limiting processes. Acceptor end-group and sidechain engineering are two handles to tune properties, and a better understanding of their specific impact on the photophysics could facilitate a more guided acceptor design. Here, the device performance, energetic landscape, and photophysics of rhodanine and dicyanovinyl end-capped IDT-based NFAs, namely, O-IDTBR and O-IDTBCN, in PCE10-based solar cells are compared by transient optical and electro-optical spectroscopy techniques and density functional theory calculations. It is revealed how the acceptors' quadrupole moments affect the interfacial energetic landscape, in turn causing differences in exciton quenching, charge dissociation efficiencies, and geminate versus non-geminate recombination losses. More precisely, it is found that the open circuit voltage (V OC ) is controlled by the acceptors' electron affinity (EA), while geminate and non-geminate recombination, and the field dependence of charge generation, rely on the acceptors' quadrupole moments. The kinetic parameters and yields of all processes are determined, and it is demonstrated that they can reproduce the performance differences of the devices' current-voltage characteristics in carrier drift-diffusion simulations. The results provide insight into the impact of the energetic landscape, specifically the role of the quadrupole moment of the acceptor, beyond trivial considerations of the donor-acceptor energy offsets.

Molecular acceptors are promising alternatives to fullerenes (e.g. PC 61 / 71 BM) in the fabrication of high-efficiency bulk-heterojunction (BHJ) solar cells. While solution-processed polymer-fullerene BHJ devices have recently met the 10% efficiency threshold, molecular acceptors have yet to prove comparably efficient with polymer donors. At this point in time, it is important to forge a better understanding of the design parameters that directly impact small-molecule (SM) acceptor performance in BHJ solar cells. In this report, we show that 2-(benzo[c][1,2,5]thiadiazol-4-ylmethylene)malononitrile (BM)-terminated SM acceptors can achieve efficiencies as high as 5.3% in BHJ solar cells with the polymer donor PCE10. Through systematic device optimization and characterization studies, we find that the nonfull-erene analogues (FBM, CBM and CDTBM) all perform comparably well, independent of the molecular structure and electronics of the π-bridge that links the two electron-deficient BM end groups. With estimated electron affinities within range of those of common fullerenes (4.0-4.3 eV), and a wider range of ionization potentials (6.2-5.6 eV), the SM acceptors absorb in the visible spectrum and effectively contribute to the BHJ device photocurrent. BM-substituted SM acceptors are promising alternatives to fullerenes in solution-processed BHJ solar cells. Given the outstanding headway made in the past recent years in optimizing polymer and SM donor performance using fullerenes as model systems, 5,20-22 a case could be made that further BHJ solar cell efficiency improvements

Small-molecule (SM) 'nonfullerene' acceptors are promising alternatives to fullerene (PC61/71BM) derivatives often used in bulk heterojunction (BHJ) organic solar cells; yet, the efficiency-limiting processes and their dependence on the acceptor structure are not clearly understood. Here, we investigate the impact of the acceptor core structure (cyclopenta-[2,1-b:3,4-b′]dithiophene (CDT) vs. indacenodithiophene (IDTT)) of malononitrile (BM)-terminated acceptors, namely CDTBM and IDTTBM, on the photophysical characteristics of BHJ solar cells. Using PCE10 as donor polymer, the IDTT-based acceptor achieves higher power conversion efficiencies (8.4%) than the CDT-based acceptor (5.6%) due to a concurrent increase in shortcircuit current and open circuit voltage. Using (ultra)fast transient spectroscopy we demonstrate that reduced geminate recombination in PCE10:IDTTBM blends is the reason for the difference in short-circuit currents. External quantum efficiency measurements indicate that the higher energy of interfacial charge transfer states observed for the IDTT-based acceptor blends is the origin of the higher open-circuit voltage.

Large‐scale production of organic solar modules requires low‐cost and reliable materials with reproducible batch‐to‐batch properties. In case of polymers, their (photo)physical properties depend strongly on the polymers’ molecular weight (MW). Herein, the impact of the MW of the donor polymer poly(3‐hexylthiophene) (P3HT) on the photophysics is studied in blends with a recently developed rhodanine‐endcapped indacenodithiophene nonfullerene acceptor (IDTBR), a bulk heterojunction (BHJ) system that potentially fulfills the aforementioned criteria for large‐scale production. It is found that the power conversion efficiency (PCE) increases when the weight‐average MW is increased from 17 kDa (PCE: 4.0%) to 34 kDa (PCE: 6.6%), whereas a further increase in MW leads to a reduced PCE of 4.4%. It is demonstrated that the charge generation efficiency, as estimated from time‐delayed collection field experiments, varies with the P3HT MW and is the reason for the differences in photocurrent and device performance. These findings provide insight into the fundamental photophysical reasons of the MW dependence of the PCE, which is taken into account when using polymer‐based nonfullerene acceptor blends in solar cell devices and modules.

The role of residual lead iodide on the photophysical properties of methylammonium lead iodide is still unclear and contradictory views exist about its impact. Herein, it is reported that there is a critical amount of residual lead iodide, which is beneficial for the solar cell performance. Transient absorption spectroscopy is used to investigate the charge carrier recombination dynamics in perovskite solar cells and to address the role of different amounts of residual lead iodide. The amount of lead iodide is varied through the perovskite thin film preparation protocol upon a modified two‐step fabrication process. Slower carrier dynamics are observed at the perovskite/titanium dioxide interface in the presence of residual lead iodide when exciting the perovskite at the perovskite/titanium interface, which correlates with improved solar cell device performance. Excitation from the perovskite side indicates that the effect of residual lead iodide is primarily at the titanium dioxide interface. Increasing the lead iodide content does not further alter the carrier recombination; on the contrary, it results in lower device performance. This study confirms that the presence of lead iodide can have a beneficial effect, as it reduces charge carrier recombination at the perovskite/titanium dioxide interface.

In article number 2100839, Jafar I. Khan, Frédéric Laquai and co‐workers report on the impact of the energetic landscape of non‐fullerene acceptors on charge generation and recombination in organic bulk heterojunction solar cells. The acceptor's quadrupole moment plays a key role in determining the device efficiency and thus is an important material parameter in the design of novel non‐fullerene acceptor molecules.

No abstract