Based on a literature review, we analyzed the World Health Organization (WHO) classification and the treatment algorithm for the odontogenic keratocyst (OKC), formerly referred to as keratocystic odontogenic tumor (KCOT). The KCOT reclassification from benign odontogenic tumors to odontogenic developmental cysts resulted from the emergence of new evidence regarding their morphogenesis and biological behavior. The authors of the most recent 2017 classification do not provide specific guidelines for OKC. Nevertheless, it has been observed that conservative surgical management is not necessarily associated with recurrences characteristic of neoplastic disease. The aim of this paper was to present the effective management strategy for a local recurrence that developed following conservative OKC enucleation in a 53-year-old patient. The treatment for recurrence consisted of enucleation, marginal osteotomy and augmentation with a cancellous bone graft harvested from a tibial tuberosity. A 6-year observation period (clinical and radiological monitoring) revealed normal bone regeneration and no evidence of recurrence. The algorithm applied in our center for the treatment of OKC/KCOT was compared with the management strategies proposed by other authors.
The aim of this work was to form NiTi and TiNiCo body temperature activated and superelastic staples for clinical joining of mandible and face bone fractures. The alloys were obtained by VIM technique. Hot and cold processing was applied to obtain wires of required diameters. The martensitic transformation was studied by DSC, XRD, and TEM. The shape memory effects were measured by a bend and free recovery ASTM F2082-06 test. The superelasticity was recorded in the tension stress-strain and by the three-point bending cycles in an instrument equipped with a Hottinger force transducer and LVDT. Excellent superelastic behavior of TiNiCo wires was obtained after cold working and annealing at 400-500°C. The body temperature activated shape memory staples were applied for fixation of mandibular condyle fractures. In experiments on the skull models, fixation of the facial fractures by using shape memory and superelastic staples were compared. The superelastic staples were used in osteosynthesis of zygomatico-maxillo-orbital fractures.
Non-steroidal anti-inflammatory drugs (NSAIDs) are commonly administered according to protocol for the management of complications such as pain, swelling, and trismus following the removal of the third impacted lower molar; however, treatment with NSAIDs may result in multiple adverse effects. The aim of this study was to compare the effectiveness of kinesio taping (KT) and the use of NSAIDs in the treatment of postoperative complications after extraction of an impacted third lower molar. Material and methods: The study comprised a group of 30 patients, randomly divided into the test group (with KT, n = 15) or the control group (without KT, n = 15). The surgery was performed according to standard procedures. In the test group, KT was applied immediately after surgery. Pain, swelling, and trismus were assessed. The VAS scale was used to assess pain. Swelling was measured based on six reference points on the face using a tailor’s meter, and a caliper was used to measure the distance between the upper and lower medial incisors of the upper and lower teeth to determine the extent of trismus. Measurements were performed three times: on the day of the surgery, on the second day following the surgery, and on the 7th day after the surgery. Results: Pain intensity (day of procedures), maximum mouth opening (on the seventh day after the surgery), and the use of NSAIDs (day of surgery) were significantly lower (p < 0.05) in the test group than in the control group. Conclusions: Kinesio taping in addition to NSAIDs was found to be more effective than NSAIDs alone in increasing the degree of jaw opening, decreasing pain intensity, and reducing the non-steroid anti-inflammatory dosage in patients after impacted mandibular wisdom teeth surgery.
The effect of plastic deformation by drawing and rolling in the martensite state and final annealing on the structure, grain size, martensitic transformations and shape memory properties of TiNiCo wires is described in the paper. The wires were cold worked by 30 and 40% and then annealed at the temperature range 300-600oC. The structure, phase composition and transformation behaviour of samples after processing and annealing were studied using transmission electron microscopy (TEM), X-ray diffraction (XRD) method and differential scanning calorimetry (DSC) technique. The marformed and annealed at 400 and 450oC wires exhibited a very good superelastic behaviour. The obtained wires were used for production of the shape memory staples with the recovery temperatures close to the human body temperature and as well as for small superelastic staples for fixation of mandible bone fractures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.