Background: For construction management, data collection is a critical process for gathering and measuring information for the evaluation and control of ongoing project performances. Taking into account that construction involves a significant amount of manual work, worker monitoring can play a key role in analyzing operations and improving productivity and safety. However, time-consuming tasks involved in field observation have brought up the issue of implementing worker observation in daily management practice. Methods: In an effort to address the issue, this paper investigates the performances of a cost-effective and portable RGB-D sensor, based on recent research efforts extended from our previous study. The performance of an RGB-D sensor is evaluated in terms of (1) the 3D positions of the body parts tracked by the sensor, (2) the 3D rotation angles at joints, and (3) the impact of the RGB-D sensor's accuracy on motion analysis. For the assessment, experimental studies were undertaken to collect motion capture datasets using an RGB-D sensor and a markerbased motion capture system, VICON, and to analyze errors as compared with the VICON used as the ground truth. As a test case, 25 trials of ascending and descending during ladder climbing were recorded simultaneously with both systems, and the resulting motion capture datasets (i.e., 3D skeleton models) were temporally and spatially synchronized for their comparison. Results: Through the comparative assessment, we found a discrepancy of 10.7 cm in the tracked locations of body parts, and a difference of 16.2 degrees in rotation angles. However, motion detection results show that the inaccuracy of an RGB-D sensor does not have a considerable effect on action recognition in the experiment. Conclusions: This paper thus provides insight into the accuracy of an RGB-D sensor on motion capture in various measures and directions of further research for the improvement of accuracy.

Sensor calibration, which can be intrinsic or extrinsic, is an essential step to achieve the measurement accuracy required for modern perception and navigation systems deployed on autonomous robots. To date, intrinsic calibration models for spinning LiDARs have been based on hypothesized based on their physical mechanisms, resulting in anywhere from three to ten parameters to be estimated from data, while no phenomenological models have yet been proposed for solid-state LiDARs. Instead of going down that road, we propose to abstract away from the physics of a LiDAR type (spinning vs solid-state, for example), and focus on the spatial geometry of the point cloud generated by the sensor. By modeling the calibration parameters as an element of a special matrix Lie Group, we achieve a unifying view of calibration for different types of LiDARs. We further prove mathematically that the proposed model is well-constrained (has a unique answer) given four appropriately orientated targets. The proof provides a guideline for target positioning in the form of a tetrahedron. Moreover, an existing Semidefinite programming global solver for SE(3) can be modified to compute efficiently the optimal calibration parameters. For solid state LiDARs, we illustrate how the method works in simulation. For spinning LiDARs, we show with experimental data that the proposed matrix Lie Group model performs equally well as physics-based models in terms of reducing the P2P distance, while being more robust to noise.