An investigation is made of the influence of an accumulated charge sprinkled on the surface of an epoxy resin plate in corona mode on partial discharge inception and its forms as analyzed by optical imaging at DC voltage. The effects of the polarities of both the deposited hetero-and homocharges were investigated. The occurrence of first streamer discharges was detected electrically and observed by optical imaging. The various forms of streamers were acquired by optical imaging and associated with the polarity and intensity of the accumulated surface charges. Surface charge sprinkling on the epoxy specimen surface was quantitatively evaluated by surface charge mapping. In addition, the effect of the subsequent discharges occurring in a heterocharge configuration above the inception voltage was observed. In terms of their directions and lengths, the kinetics of the streamer filaments revealed a strong dependence on both the polarity and the intensity of an accumulated charge. Compared with the reference charge-free surface, the strongest drop in dielectric strength in the interelectrode space with a sprinkled charge was obtained for the heterocharge configuration. The presented results provide a contribution to the assessment of streamer behaviour in the presence of accumulated surface charges, including its polarity and intensity.This is an open access article under the terms of the Creative Commons Attribution-NonCommercial License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.
This paper describes a correlation of partial discharge phase-resolved patterns with an optical imaging performed in a non-uniform electric field configuration. The influence of different dielectric barrier materials, placed on the plane electrode, on the discharge propagation and surface landing was investigated. The investigations were focused on the corona at positive polarity of AC high voltage. It was found that the initial positive corona stage is similar for all cases whereas the discharge propagation and surface landing strongly depends on the barrier material properties. The observed streamer discharge modes have been described by the geometrical measures such as stem length, stretch of a discharge profile on the dielectric barrier surface and an hemispherical envelope of discharge filaments. Since various dielectrics reveal different properties of charge accumulation and surface neutralization, the charge memory effect may be visible and can be related to the ability to create and sustain of additional electric field component. It may refer to subsequent discharges as well as to conditions faced at the voltage polarity reversal. The correspondence between different forms of phase-resolved patterns have been associated with the modes of streamer discharges observed by optical imaging. Presented methodology poses huge potential for both scientific investigations on underlying discharge phenomena as well as on the application in future diagnostic systems of HV insulation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.