Composites of Linear Low Density Polyethylene (LLDPE) and Graphene Nanoplatelets (GNPs) were processed using a twin screw extruder under different extrusion conditions. The effects of screw speed, feeder speed and GNP content on the electrical, thermal and mechanical properties of composites were investigated. The inclusion of GNPs in the matrix improved the thermal stability and conductivity by 2.7% and 43%, respectively. The electrical conductivity improved from 10 -11 to 10 -5 S/m at 150 rpm due to the high thermal stability of the GNPs and the formation of phonon and charge carrier networks in the polymer matrix. Higher extruder speeds result in a better distribution of the GNPs in the matrix and a significant increase in thermal stability and thermal conductivity. However, this effect is not significant for the electrical conductivity and tensile strength. The addition of GNPs increased the viscosity of the polymer, which will lead to higher processing power requirements. Increasing the extruder speed led to a reduction in viscosity, which is due to thermal degradation and/or chain scission. Thus, while high speeds result in better dispersions, the speed needs to be optimized to prevent detrimental impacts on the properties.

No abstract

No abstract

No abstract

No abstract

Sun (2016) Effect of two types of graphene nanoplatelets on the physico-mechanical properties of linear low-density polyethylene composites, Advanced

An adaptation of the fracture toughness test method, the J‐integral technique, is described within the general framework of polymer fracture behavior. It is shown that there is a strong interaction between different morphological parameters in the way they affect the fracture behavior of isotactic polypropylene (iPP). The fracture toughness decreases with increasing crystallinity at a fixed spherulite size. The fracture toughness also decreases slightly with increasing spherulite size at a constant crystallinity, but this may not be a pure spherulite size effect. The use of a nucleating agent results in a very fine spherulitic structure but facilitates crack growth and reduces the material toughness beyond the crack initiation stage. This suggests that the material behavior is dictated by the increase in crystallization temperature caused by the presence of the nucleating agent and not by the change in spherulite size. © 1995 John Wiley & Sons, Inc.

No abstract