In contrast to the poor plasticity that is usually observed in bulk metallic glasses, super plasticity is achieved at room temperature in ZrCuNiAl synthesized through the appropriate choice of its composition by controlling elastic moduli. Microstructures analysis indicates that the super plastic bulk metallic glasses are composed of hard regions surrounded by soft regions, which enable the glasses to undergo true strain of more than 160%. This finding is suggestive of a solution to the problem of brittleness in, and has implications for understanding the deformation mechanism of, metallic glasses.

We report a brittle Mg-based bulk metallic glass which approaches the ideal brittle behavior. However, a dimple structure is observed at the fracture surface by high resolution scanning electron microscopy, indicating some type of "ductile" fracture mechanism in this very brittle glass. We also show, from the available data, a clear correlation between the fracture toughness and plastic process zone size for various glasses. The results indicate that the fracture in brittle metallic glassy materials might also proceed through the local softening mechanism but at different length scales.

We report cerium-based bulk metallic glasses with an exceptionally low glass transition temperature T g , similar to or lower than that of many polymers. We demonstrate that, in near-boiling water, these materials can be repeatedly shaped, and can thus be regarded as metallic plastics. Their resistance to crystallization permits extended forming times above T g and ensures an adequate lifetime at room temperature. Such materials, combining polymerlike thermoplastic behavior with the distinctive properties of metallic glasses, are highly unusual for metallic alloys and have great potential in applications and can also facilitate studies of the supercooled liquid state.

Magnetocaloric effect and refrigerant capacity of Gd-based Gd53Al24Co20Zr3 and Gd33Er22Al25Co20 bulk metallic glasses are investigated. It is found that the magnetic entropy changes compare favorably with that of Gd and are slightly larger than that of the known crystalline magnetic refrigerant compound Gd5Si2Ge1.9Fe0.1. Their good refrigerant efficiency combining with high electrical resistivity, high thermal stability, outstanding mechanical properties, tunable nature, and sufficiently soft magnetic property make them an attractive candidate for magnetic refrigerants in the temperature range of 10–100K.

Out-of-plane, nanoscale periodic corrugations are observed in the dynamic fracture surface of brittle bulk metallic glasses with fracture toughness approaching that of silica glasses. A model based on the meniscus instability and plastic zone theory is used to explain such dynamic crack instability. The results indicate that the local softening mechanism in the fracture is an essential ingredient for controlling the formation of the unique corrugations, and might provide a new insight into the origin of fracture surface roughening in brittle materials.

CeAlNiCu alloys can be readily cast into glassy rods with up to 5mm in diameter. The Ce-based bulk metallic glasses (BMGs) exhibit a wide supercooled region up to 78K, very low glass transition temperature (Tg=359K), melting temperature (Tm=637K), and Debye temperature (θD=144K). Ultrasonic measurements demonstrate that these Ce-based BMGs are very soft, having the lowest elastic moduli in known BMGs. These features suggest that the “soft” BMGs are an ideal model system for investigating physical problems in glass transition, supercooled liquid and melt states, and have potential applications as a functional material as well.

No abstract

A rare-earth Pr-based bulk metallic glass (BMG) is obtained in the shape of rod up to 5 mm in diameter by die cast. Unlike other rare-earth-based BMGs, it exhibits a distinct glass transition, the low glass transition temperature (Tg=409 K), a large and stable supercooled liquid region, and paramagnetic property. The glass transition as well as its kinetic nature and the fragility parameters of the BMG have been studied. The BMG offers an ideal model to investigate the nature of glass transition as well as the relaxation and nucleation with a large experimentally accessible time and temperature window at low temperatures.