The general approach in heart valve tissue engineering is to mimic the shape of the native valve in the attempt to recreate the natural haemodynamics. In this article, we report the fabrication of the first tissue-engineered heart valve (TEHV) based on a tubular leaflet design, where the function of the leaflets of semilunar heart valves is performed by a simple tubular construct sutured along a circumferential line at the root and at three single points at the sinotubular junction. The tubular design is a recent development in pericardial (nonviable) bioprostheses, which has attracted interest because of the simplicity of the construction and the reliability of the implantation technique. Here we push the potential of the concept further from the fabrication and material point of view to realize the tube-in-tube valve: an autologous, living HV with remodelling and growing capability, physiological haemocompatibility, simple to construct and fast to implant. We developed two different fabrication/conditioning procedures and produced fibrin-based constructs embedding cells from the ovine umbilical cord artery according to the two different approaches. Tissue formation was confirmed by histology and immunohistology. The design of the tube-in-tube foresees the possibility of using a textile coscaffold (here demonstrated with a warp-knitted mesh) to achieve enhanced mechanical properties in vision of implantation in the aortic position. The tube-in-tube represents an attractive alternative to the conventional design of TEHVs aiming at reproducing the valvular geometry.
Heart valves are elaborate and highly heterogeneous structures of the circulatory system. Despite the well accepted relationship between the structural and mechanical anisotropy and the optimal function of the valves, most approaches to create tissue-engineered heart valves (TEHVs) do not try to mimic this complexity and rely on one homogenous combination of cells and materials for the whole construct. The aim of this study was to establish an easy and versatile method to introduce spatial diversity into a heart valve fibrin scaffold. We developed a multiple-step injection molding process that enables the fabrication of TEHVs with heterogeneous composition (cell/scaffold material) of wall and leaflets without the need of gluing or suturing components together, with the leaflets firmly connected to the wall. The integrity of the valves and their functionality was proved by either opening/closing cycles in a bioreactor (proof of principle without cells) or with continuous stimulation over 2 weeks. We demonstrated the potential of the method by the two-step molding of the wall and the leaflets containing different cell lines. Immunohistology after stimulation confirmed tissue formation and demonstrated the localization of the different cell types. Furthermore, we showed the proof of principle fabrication of valves using different materials for wall (fibrin) and leaflets (hybrid gel of fibrin/elastin-like recombinamer) and with layered leaflets. The method is easy to implement, does not require special facilities, and can be reproduced in any tissue-engineering lab. While it has been demonstrated here with fibrin, it can easily be extended to other hydrogels.
Numerous studies show promise for cell-based tissue engineering strategies aiming to repair painful intervertebral disc (IVD) degeneration. However, clinical translation to human IVD repair is slow. In the present study, the regenerative potential of an autologous nucleus pulposus (NP)-cell-seeded thermoresponsive hyaluronic acid hydrogel in human lumbar IVDs was assessed under physiological conditions. First, agaroseencased in vitro constructs were developed, showing greater than 90 % NP cell viability and high proteoglycan deposition within HA-pNIPAM hydrogels following 3 weeks of dynamic loading. Second, a bovine-induced IVD degeneration model was used to optimise and validate T1ρ magnetic resonance imaging (MRI) for detection of changes in proteoglycan content in isolated intact IVDs. Finally, isolated intact human lumbar IVDs were pre-scanned using the established MRI sequence. Then, IVDs were injected with HA-pNIPAM hydrogel alone or autologous NP-cell-seeded. Next, the treated IVDs were cultured under cyclic dynamic loading for 5 weeks. Post-treatment T1ρ values were significantly higher as compared to pre-treatment scans within the same IVD and region of interest. Histological evaluation of treated human IVDs showed that the implanted hydrogel alone accumulated proteoglycans, while those that contained NP cells also displayed neo-matrix-surrounded cells within the gel. The study indicated a clinical potential for repairing early degenerative human IVDs using autologous cells/hydrogel suspensions. This unique IVD culture setup, combined with the long-term physiological culture of intact human IVDs, allowed for a more clinically relevant evaluation of human tissue repair and regeneration, which otherwise could not be replicated using the available in vitro and in vivo models.
In the field of tissue engineering, the properties of the scaffolds are of crucial importance for the success of the application. Hybrid materials combine properties of the different components that constitute them. In this study hybrid gels of elastin-like recombinamer (ELR) and fibrin were prepared with a range on polymer concentrations and ELR-to-fibrin ratios. The correlation between SEM micrographs, porosity, swelling ratio and rheological properties was discussed and a poroelastic mechanism was suggested to explain the mechanical behavior of the hybrid gels. Applicability as scaffold material for cardiovascular tissue engineering was shown by the realization of cell-laden matrixes which supported the synthesis of collagens as revealed by immunohistochemical analysis. As a proof of concept, a tissue-engineered heart valve was fabricated by injection moulding and cultivated in a bioreactor for 3 weeks under dynamic conditions. Tissue analysis revealed production of collagen I and III, fundamental proteins for cardiovascular constructs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.