This paper is the second part of the new evaluation of atomic masses, Ame2012. From the results of a least-squares calculation, described in Part I, for all accepted experimental data, we derive here tables and graphs to replace those of Ame2003. The first table lists atomic masses. It is followed by a table of the influences of data on primary nuclides, a table of separation energies and reaction energies, and finally, a series of graphs of separation and decay energies. The last section in this paper lists all references to the input data used in Part I of this Ame2012 and also to the data included in the Nubase2012 evaluation (first paper in this issue).

This paper is the second part of the new evaluation of atomic masses, AME2016. Using least-squares adjustments to all evaluated and accepted experimental data, described in Part I, we derive tables with numerical values and graphs to replace those given in AME2012. The first table lists the recommended atomic mass values and their uncertainties. It is followed by a table of the influences of data on primary nuclides, a table of various reaction and decay energies, and finally, a series of graphs of separation and decay energies. The last section of this paper lists all references of the input data used in the AME2016 and the NUBASE2016 evaluations (first paper in this issue).AMDC: http://amdc.impcas.ac.cn/ Contents  The AME2016 atomic mass evaluation (II). Tables, graphs and referencesAcrobat PDF (293 KB)  Table I. The 2016 Atomic mass tableAcrobat PDF (273 KB)  Table II. Influences on primary nuclidesAcrobat PDF (160 KB)  Table III. Nuclear-reaction and separation energiesAcrobat PDF (517 KB)  Graphs of separation and decay energiesAcrobat PDF (589 KB)  References used in the AME2016 and the NUBASE2016 evaluationsAcrobat PDF (722 KB)

This is the second part of the new evaluation of atomic masses, AME2020. Using least-squares adjustments to all evaluated and accepted experimental data, described in Part I, we derived tables with numerical values and graphs which supersede those given in AME2016. The first table presents the recommended atomic mass values and their uncertainties. It is followed by a table of the influences of data on primary nuclides, a table of various reaction and decay energies, and finally, a series of graphs of separation and decay energies. The last section of this paper provides all input data references that were used in the AME2020 and the NUBASE2020 evaluations.

This paper presents the NUBASE2016 evaluation that contains the recommended values for nuclear and decay properties of 3437 nuclides in their ground and excited isomeric (T1/2 ⩾ 100 ns) states. All nuclides for which any experimental information is known were considered. NUBASE2016 covers all data published by October 2016 in primary (journal articles) and secondary (mainly laboratory reports and conference proceedings) references, together with the corresponding bibliographical information. During the development of NUBASE2016, the data available in the ‘Evaluated Nuclear Structure Data File’ (ENSDF) database were consulted and critically assessed for their validity and completeness. Furthermore, a large amount of new data and some older experimental results that were missing from ENSDF were compiled, evaluated and included in NUBASE2016. The atomic mass values were taken from the ‘Atomic Mass Evaluation’ (AME2016, second and third parts of the present issue). In cases where no experimental data were available for a particular nuclide, trends in the behavior of specific properties in neighboring nuclides (TNN) were examined. This approach allowed to estimate values for a range of properties that are labeled in NUBASE2016 as ‘non-experimental’ (flagged ‘#’). Evaluation procedures and policies used during the development of this database are presented, together with a detailed table of recommended values and their uncertainties.AMDC: http://amdc.impcas.ac.cn/ Contents  The NUBASE2016 evaluation of nuclear propertiesAcrobat PDF (1.1 MB)  Table I. The NUBASE2016 table of nuclear and decay propertiesAcrobat PDF (706 KB)

This paper presents the NUBASE2012 evaluation that contains the recommended values for nuclear and decay properties of nuclides in their ground and excited isomeric (T 1/2 ≥100 ns) states. All nuclides for which some experimental information is known are considered. NUBASE2012 covers all up to date experimental data published in primary (journal articles) and secondary (mainly laboratory reports and conference proceedings) references, together with the corresponding bibliographical information. During the development of NUBASE2012, the data available in the "Evaluated Nuclear Structure Data File" (ENSDF) database were consulted, and critically assessed of their validity and completeness. Furthermore, a large amount of new and somewhat older experimental results that were missing in ENSDF were compiled, evaluated and included in NUBASE2012. The atomic mass values were taken from the "Atomic Mass Evaluation" (AME2012, second and third parts of the present issue). In cases where no experimental data were available for a particular nuclide, trends in the behavior of specific properties in neighboring nuclei (TNN) were examined. This approach allowed to estimate, whenever possible, values for a range of properties, and are labeled in NUBASE2012 as "non-experimental" (flagged "#"). Evaluation procedures and policies that were used during the development of this database are presented, together with a detailed table of recommended values and their uncertainties. AMDC: http://amdc.in2p3.fr/ and http://amdc.impcas.ac.cn/ * This work has been undertaken with the encouragement of the IUPAP Commission on Symbols, Units, Nomenclature, Atomic Masses and Fundamental Constants (SUNAMCO).

The NUBASE2020 evaluation contains the recommended values of the main nuclear physics properties for all nuclei in their ground and excited, isomeric (T1/2 100 ns) states. It encompasses all experimental data published in primary (journal articles) and secondary (mainly laboratory reports and conference proceedings) references, together with the corresponding bibliographical information. In cases where no experimental data were available for a particular nuclide, trends in the behavior of specific properties in neighboring nuclei were examined and estimated values are proposed. Evaluation procedures and policies that were used during the development of this evaluated nuclear data library are presented, together with a detailed table of recommended values and their uncertainties.

This paper is the first of two articles (Part I and Part II) that presents the results of the new atomic mass evaluation, Ame2016. It includes complete information on the experimental input data (also including unused and rejected ones), as well as details on the evaluation procedures used to derive the tables of recommended values given in the second part. This article describes the evaluation philosophy and procedures that were implemented in the selection of specific nuclear reaction, decay and mass-spectrometric results. These input values were entered in the least-squares adjustment for determining the best values for the atomic masses and their uncertainties. Details of the calculation and particularities of the Ame are then described. All accepted and rejected data, including outweighted ones, are presented in a tabular format and compared with the adjusted values obtained using the least-squares fit analysis. Differences with the previous Ame2012 evaluation are discussed and specific information is presented for several cases that may be of interest to Ame users. The second Ame2016 article gives a table with the recommended values of atomic masses, as well as tables and graphs of derived quantities, along with the list of references used in both the Ame2016 and the Nubase2016 evaluations (the first paper in this issue).

This is the first of two articles (Part I and Part II) that presents the results of the new atomic mass evaluation, AME2020. It includes complete information on the experimental input data that were used to derive the tables of recommended values which are given in Part II. This article describes the evaluation philosophy and procedures that were implemented in the selection of specific nuclear reaction, decay and mass-spectrometric data which were used in a least-squares fit adjustment in order to determine the recommended mass values and their uncertainties. All input data, including both the accepted and rejected ones, are tabulated and compared with the adjusted values obtained from the least-squares fit analysis. Differences with the previous AME2016 evaluation are discussed and specific examples are presented for several nuclides that may be of interest to AME users.