The all-vanadium redox fl ow battery is a promising technology for large-scale renewable and grid energy storage, but is limited by the low energy density and poor stability of the vanadium electrolyte solutions. A new vanadium redox fl ow battery with a signifi cant improvement over the current technology is reported in this paper. This battery uses sulfate-chloride mixed electrolytes, which are capable of dissolving 2.5 M vanadium, representing about a 70% increase in energy capacity over the current sulfate system. More importantly, the new electrolyte remains stable over a wide temperature range of − 5 to 50 ° C, potentially eliminating the need for electrolyte temperature control in practical applications. This development would lead to a signifi cant reduction in the cost of energy storage, thus accelerating its market penetration.

No abstract

Redox flow batteries are receiving wide attention for electrochemical energy storage due to their unique architecture and advantages, but progress has so far been limited by their low energy density (~25 Wh l−1). Here we report a high-energy density aqueous zinc-polyiodide flow battery. Using the highly soluble iodide/triiodide redox couple, a discharge energy density of 167 Wh l−1 is demonstrated with a near-neutral 5.0 M ZnI2 electrolyte. Nuclear magnetic resonance study and density functional theory-based simulation along with flow test data indicate that the addition of an alcohol (ethanol) induces ligand formation between oxygen on the hydroxyl group and the zinc ions, which expands the stable electrolyte temperature window to from −20 to 50 °C, while ameliorating the zinc dendrite. With the high-energy density and its benign nature free from strong acids and corrosive components, zinc-polyiodide flow battery is a promising candidate for various energy storage applications.

No abstract

A TEMPO-based non-aqueous electrolyte with the TEMPO concentration as high as 2.0 m is demonstrated as a high-energy-density catholyte for redox flow battery applications. With a hybrid anode, Li|TEMPO flow cells using this electrolyte deliver an energy efficiency of ca. 70% and an impressively high energy density of 126 W h L(-1) .

Nonaqueous redox flow batteries hold the promise of achieving higher energy density because of the broader voltage window than aqueous systems, but their current performance is limited by low redox material concentration, cell efficiency, cycling stability, and current density. We report a new nonaqueous all-organic flow battery based on high concentrations of redox materials, which shows significant, comprehensive improvement in flow battery performance. A mechanistic electron spin resonance study reveals that the choice of supporting electrolytes greatly affects the chemical stability of the charged radical species especially the negative side radical anion, which dominates the cycling stability of these flow cells. This finding not only increases our fundamental understanding of performance degradation in flow batteries using radical-based redox species, but also offers insights toward rational electrolyte optimization for improving the cycling stability of these flow batteries.

Redox-active organic materials (ROMs) have shown great promise for redox flow battery applications but generally encounter limited cycling efficiency and stability at relevant redox material concentrations in nonaqueous systems. Here we report a new heterocyclic organic anolyte molecule, 2,1,3-benzothiadiazole, that has high solubility, a low redox potential, and fast electrochemical kinetics. Coupling it with a benchmark catholyte ROM, the nonaqueous organic flow battery demonstrated significant improvement in cyclable redox material concentrations and cell efficiencies compared to the state-of-the-art nonaqueous systems. Especially, this system produced exceeding cyclability with relatively stable efficiencies and capacities at high ROM concentrations (>0.5 M), which is ascribed to the highly delocalized charge densities in the radical anions of 2,1,3-benzothiadiazole, leading to good chemical stability. This material development represents significant progress toward promising next-generation energy storage.

Nonaqueous redox fl ow batteries are emerging fl ow-based energy storage technologies that have the potential for higher energy densities than their aqueous counterparts because of their wider voltage windows. However, their performance has lagged far behind their inherent capability due to one major limitation of low solubility of the redox species. Here, a molecular structure engineering strategy towards high performance nonaqueous electrolyte is reported with signifi cantly increased solubility. Its performance outweighs that of the state-of-the-art nonaqueous redox fl ow batteries. In particular, an ionic-derivatized ferrocene compound is designed and synthesized that has more than 20 times increased solubility in the supporting electrolyte. The solvation chemistry of the modifi ed ferrocene compound. Electrochemical cycling testing in a hybrid lithium-organic redox fl ow battery using the assynthesized ionic-derivatized ferrocene as the catholyte active material demonstrates that the incorporation of the ionic-charged pendant signifi cantly improves the system energy density. When coupled with a lithium-graphite hybrid anode, the hybrid fl ow battery exhibits a cell voltage of 3.49 V, energy density about 50 Wh L −1 , and energy effi ciency over 75%. These results reveal a generic design route towards high performance nonaqueous electrolyte by rational functionalization of the organic redox species with selective ligand.