For the first time, on-chip planar hydrodynamic chromatography is combined with UV absorption detection. This technique is suitable for size characterization of synthetic polymers, biopolymers, and particles. Possible advantages of an on-chip hydrodynamic chromatography system over conventional techniques, such as size exclusion chromatography, and field-flow fractionation are fast analysis, high efficiency, reduced solvent consumption, and easy temperature control. The hydrodynamic separations are performed in a planar configuration realized in fused silica using a mixture of fluorescent and nonfluorescent polystyrene particles with sizes ranging from 26 to 155 nm. The planar chip configuration consists of a 1-microm-high, 0.5-mm-wide, and 69-mm-long channel, an integrated 150-pL injection structure, and a 30-microm-deep and 30-microm-wide detection cell, suitable for UV absorption detection. By combination of the separation data obtained in the new fused-silica chip with those obtained using a previously presented planar hydrodynamic chromatography chip, which was realized using silicon and glass microtechnology, a description of the retention and dispersion behavior of planar hydrodynamic chromatography is obtained. Especially the influence of the sidewalls on the dispersion is investigated. Furthermore a hydrodynamic separation within 70 s of several biopolymers is shown in the glass-silicon chip.

For the first time, a miniaturized hydrodynamic chromatography chip system has been developed and tested on separation of fluorescent nanospheres and macromolecules. The device can be applied to size characterization of synthetic polymers, biopolymers, and particles, as an attractive alternative to the classical separation methods such as size exclusion chromatography or field-flow fractionation. The main advantages are fast analysis, high separation efficiency, negligible solvent consumption, and easy temperature control. The prototype chip contains a rectangular flat separation channel with dimensions of 1 microm deep and 1000 microm wide, integrated with a 300-pL injector on a silicon substrate. The silicon microtechnology provides precisely defined geometry, high rigidity, and compatibility with organic solvents or high temperature. All flows are pressure driven, and a specific injection system is employed to avoid excessive sample loading times, demonstrating an alternative way of lab-on-a-chip design. Separations obtained in 3 min show the high performance of the device and are also the first demonstration of flat channel hydrodynamic chromatography in practice.

The zebrafish embryo is a small, cheap, whole-animal model which may replace rodents in some areas of research. Unfortunately, zebrafish embryos are commonly cultured in microtitre plates using cell-culture protocols with static buffer replacement. Such protocols are highly invasive, consume large quantities of reagents and do not readily permit high-quality imaging. Zebrafish and rodent embryos have previously been cultured in static microfluidic drops, and zebrafish embryos have also been raised in a prototype polydimethylsiloxane setup in a Petri dish. Other than this, no animal embryo has ever been shown to undergo embryonic development in a microfluidic flow-through system. We have developed and prototyped a specialized lab-on-a-chip made from bonded layers of borosilicate glass. We find that zebrafish embryos can develop in the chip for 5 days, with continuous buffer flow at pressures of 0.005-0.04 MPa. Phenotypic effects were seen, but these were scored subjectively as 'minor'. Survival rates of 100% could be reached with buffer flows of 2 µL per well per min. High-quality imaging was possible. An acute ethanol exposure test in the chip replicated the same assay performed in microtitre plates. More than 100 embryos could be cultured in an area, excluding infrastructure, smaller than a credit card. We discuss how biochip technology, coupled with zebrafish larvae, could allow biological research to be conducted in massive, parallel experiments, at high speed and low cost.

SummaryLeukocyte extravasation is mediated by multiple interactions of adhesive surface structures with ligands on endothelial cells and matrix components. The functional role of 31 (CD29) integrins (or very late antigen [VLA] proteins) in eosinophil migration across polycarbonate filters was examined under several in vitro conditions. Eosinophil migration induced by the chemoattractant C5a or platelet-activating factor was fully inhibited by monoclonal antibody (mAb) 8A2, a recently characterized "activating" CD29 mAb. However, inhibition by mAb 8A2 was observed only under filter conditions that best reflected the in vivo situation, i.e., when the eosinophils migrated over filters preincubated with the extracellular matrix (ECM) protein fibronectin (FN), or when the filters were covered with confluent monolayers of cultured human umbilical vein endothelial cells (HUVEC). When bare untreated filters were used, mAb 8A2 had no effect, whereas the C5a-directed movement was prevented by CD18 mAb. Studies with c~-subunit (CD49)-specific mAbs indicated that the integrins VLA-4 and -5 mediated migration across FN-preincubated falters, and VLA-2, -4, -5, and -6 were involved in eosinophil migration through filters covered with HUVEC. In contrast with the activating CD29 mAb 8A2, a combination of blocking CD49 mAbs or the nonactivating but blocking CD29 mAb AIIB2 failed to inhibit completely eosinophil migration over FN-preincubated or HUVEC-covered filters, mAb 8A2 stimulated binding to FN but not to HUVEC. Moreover, eosinophil migration over FN-preincubated or HUVEC-covered filters was significantly inhibited by anti-connecting segment 1 (CS-1) mAbs, as well as the sohble CS-1 peptide (unlike migration across bare untreated falters). Thus, inhibition of eosinophil migration by mAb 8A2 depended upon the presence of ECM proteins and not upon the presence of HUVEC per se. In conclusion, "freezing" adhesion receptors of the 31 integrin family into their high-avidity binding state by the activating CD29 mAb 8A2 results in a complete inhibition of eosinophil migration under physiological conditions. Hence, activation of 31 integrin-mediated cell adhesion may represent a new approach to prevent influx of inflammatory cells. though eosinophils constitute a minor fraction of the leukocytes in the circulation, they are a major component of the cellular infiltrate at extravascular sites of inflammation under certain pathological circumstances, such as allergic late phase responses in asthma and atopic skin reactions, parasitic infestation, and some delayed-type hypersensitivity reactions (1)(2)(3)(4)(5).At the beginning of this process of localized eosinophilic infiltration, the eosinophils leave the vascular compartment.The extracellular matrix (ECM) t of the vascular endothelial cells comprises all kinds of proteins and heavily glycosylated structures (proteoglycans) to which the infiltrating immune cells can attach during this migration along gradients of chemotactic factors. Platelet-activating factor (PAF) and the 1 Abbrevi...

No abstract