Wire cost and ac loss are paramount issues for the future uptake of high-temperature superconductor (HTS) ac machines. In particular, new approaches which reduce the total manufacturing cost of HTS coils are critical to the future commercial uptake of HTS technology. Here, we present the results of ac loss measurements of a hybrid HTS coil assembly comprising end windings (EWs) wound with BSCCO wire and a central winding (CW) wound with REBCO wire. As a cost mitigation measure, we have chosen to use REBCO wire which possesses a relatively low self-field Ic at 77 K, equating to approximately half that of the BSCCO wire. Transport ac loss measurements were made on the total coil assembly at both 77 K and 65 K, using a recently developed lockin amplifier approach. We show the ac losses in the assembly at these temperatures scale with the overall transport critical current threshold of the hybrid coil assembly. The results are then compared with a reference coil assembly having similar geometrical dimensions, and in which both the EWs and CW were wound with identical BSCCO wire. Surprisingly, we observe that the ac loss of the hybrid coil is lower than that of the BSCCO coil, despite the CW of the hybrid coil employing wire a lower overall average Ic. We attribute this effect to the lower ac loss of coated conductor REBCO wire under parallel field, which is the dominant field orientation in the CW region. Based on this observation, we conclude that the hybrid assembly design is a good design strategy for HTS coil assemblies, enabling both wire cost and ac loss to be balanced. © 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
This is the Accepted Manuscript version of an article accepted for publication in 'Superconductor Science and Technology". IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/0953-2048/29/9/095011.
Wire cost and ac loss are paramount issues for the future uptake of high-temperature superconductor (HTS) ac machines. In particular, new approaches which reduce the total manufacturing cost of HTS coils are critical to the future commercial uptake of HTS technology. Here, we present the results of ac loss measurements of a hybrid HTS coil assembly comprising end windings (EWs) wound with BSCCO wire and a central winding (CW) wound with REBCO wire. As a cost mitigation measure, we have chosen to use REBCO wire which possesses a relatively low self-field Ic at 77 K, equating to approximately half that of the BSCCO wire. Transport ac loss measurements were made on the total coil assembly at both 77 K and 65 K, using a recently developed lockin amplifier approach. We show the ac losses in the assembly at these temperatures scale with the overall transport critical current threshold of the hybrid coil assembly. The results are then compared with a reference coil assembly having similar geometrical dimensions, and in which both the EWs and CW were wound with identical BSCCO wire. Surprisingly, we observe that the ac loss of the hybrid coil is lower than that of the BSCCO coil, despite the CW of the hybrid coil employing wire a lower overall average Ic. We attribute this effect to the lower ac loss of coated conductor REBCO wire under parallel field, which is the dominant field orientation in the CW region. Based on this observation, we conclude that the hybrid assembly design is a good design strategy for HTS coil assemblies, enabling both wire cost and ac loss to be balanced. © 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
This is the Accepted Manuscript version of an article accepted for publication in 'Superconductor Science and Technology". IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/0953-2048/29/9/095011.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.