No abstract

This paper considers the evolution of smooth, two-dimensional vortices subject to a rotating external strain field, which generates regions of recirculating, cat's eye stream line topology within a vortex. When the external strain field is smoothly switched off, the cat's eyes may persist, or they may disappear as the vortex relaxes back to axisymmetry. A numerical study obtains criteria for the persistence of cat's eyes as a function of the strength and time-scale of the imposed strain field, for a Gaussian vortex profile.In the limit of a weak external strain field and high Reynolds number, the disturbance decays exponentially, with a rate that is linked to a Landau pole of the linear inviscid problem. For stronger strain fields, but not strong enough to give persistent cat's eyes, the exponential decay of the disturbance varies: as time increases the decay slows down, because of the nonlinear feedback on the mean profile of the vortex. This is confirmed by determining the decay rate given by the Landau pole for these modified profiles. For strain fields strong enough to generate persistent cat's eyes, their location and rotation rate are determined for a range of angular velocities of the external strain field, and are again linked to Landau poles of the mean profiles, modified through nonlinear effects.

In this paper a breakup model for analysing the evolution of transient fuel sprays characterised by a coherent liquid core emerging from the injection nozzle, throughout the injection process, is proposed. The coherent liquid core is modelled as a liquid jet and a breakup model is formulated. The spray breakup is described using a composite model that separately addresses the disintegration of the liquid core into droplets and their further aerodynamic breakup. The jet breakup model uses the results of hydrodynamic stability theory to de ne the breakup length of the jet, and downstream of this point, the spray breakup process is modelled for droplets only. The composite breakup model is incorporated into the KIVA II Computational Fluid Dynamics (CFD) code and its results are compared with existing breakup models, including the classic WAVE model and a previously developed composite WAVE model (modi ed WAVE model) and in{house experimental observations of transient Diesel fuel sprays. The hydrodynamic stability results used in both the jet breakup model and the WAVE droplet breakup model are also investigated. A new velocity pro le is considered for these models which consists of a jet with a linear shear layer in the gas phase surrounding the liquid core to model the e ect of a viscous gas on the breakup process. This velocity pro le changes the driving instability mechanism of the jet from a surface tension driven instability for the currently used plug ow jet with no shear layers, to an instability driven by the thickness of the shear layer. In particular, it is shown that appreciation of the shear layer instability mechanism in the composite model allows larger droplets to be predicted at jet breakup, and gives droplet sizes which are more consistent with the experimental observations. The inclusion of the shear layer into the jet velocity pro le is supported by previous experimental studies, and further extends the inviscid ow theory used in the formulation of the classic WAVE breakup model

We consider the interaction of free-stream disturbances with the leading edge of a body and its effect on the transition point. We present a method which combines an asymptotic receptivity approach, and a numerical method which marches through the Orr-Sommerfeld region. The asymptotic receptivity analysis produces a three deck eigensolution which in its far downstream limiting form, produces an upstream boundary condition for our numerical Parabolized Stability Equation (PSE). We discuss the advantages of this method against existing numerical and asymptotic analysis and present results which justifies this method for the case of a semi-infinite flat plate, where asymptotic results exist in the Orr-Sommerfeld region. We also discuss the limitations of the PSE and comment on the validity of the upstream boundary conditions. Good agreement is found between the present results and the numerical results of Haddad & Corke (1998).

The spreading and diffusion of two-dimensional vortices subject to weak external random strain fields is examined. The response to such a field of given angular frequency depends on the profile of the vortex and can be calculated numerically. An effective diffusivity can be determined as a function of radius and may be used to evolve the profile over a long time scale, using a diffusion equation that is both nonlinear and non-local. This equation, containing an additional smoothing parameter, is simulated starting with a Gaussian vortex. Fine scale steps in the vorticity profile develop at the periphery of the vortex and these form a vorticity staircase. The effective diffusivity is high in the steps where the vorticity gradient is low: between the steps are barriers characterized by low effective diffusivity and high vorticity gradient. The steps then merge before the vorticity is finally swept out and this leaves a vortex with a compact core and a sharp edge. There is also an increase in the effective diffusion within an encircling surf zone.In order to understand the properties of the evolution of the Gaussian vortex, an asymptotic model first proposed by Balmforth, Llewellyn Smith & Young (J. Fluid Mech., vol. 426, 2001, p. 95) is employed. The model is based on a vorticity distribution that consists of a compact vortex core surrounded by a skirt of relatively weak vorticity. Again simulations show the formation of fine scale vorticity steps within the skirt, followed by merger. The diffusion equation we develop has a tendency to generate vorticity steps on arbitrarily fine scales; these are limited in our numerical simulations by smoothing the effective diffusivity over small spatial scales.

This paper examines two key features of time-dependent conformal mappings in doubly-connected regions, the evolution of the conformal modulus Q(t) and the boundary transformation generalizing the Hilbert transform. It also applies the theory to an unsteady free surface flow. Focusing on inviscid, incompressible, irrotational fluid sloshing in a rectangular vessel, it is shown that the explicit calculation of the conformal modulus is essential to correctly predict features of the flow. Results are also presented for fully dynamic simulations which use a time-dependent conformal mapping and the Garrick generalization of the Hilbert transform to map the physical domain to a time-dependent rectangle in the computational domain. The results of this new approach are compared to the complementary numerical scheme of Frandsen (J. Comput. Phys. 196:53-87, 2004) and it is shown that correct calculation of the conformal modulus is essential in order to obtain agreement between the two methods.

This paper examines the dynamic coupling between a sloshing fluid and the motion of the vessel containing the fluid. A mechanism is identified which leads to an energy exchange between the vessel dynamics and fluid motion. It is based on a 1:1 resonance in the linearized equations, but nonlinearity is essential for the energy transfer. For definiteness, the theory is developed for Cooker's pendulous sloshing experiment. The vessel has a rectangular cross section, is partially filled with a fluid, and is suspended by two cables. A nonlinear normal form is derived close to an internal 1:1 resonance, with the energy transfer manifested by a heteroclinic connection which connects the purely symmetric sloshing modes to the purely anti-symmetric sloshing modes. Parameter values where this pure energy transfer occurs are identified. In practice, this energy transfer can lead to sloshing-induced destabilization of fluid-carrying vessels.

No abstract